path: root/content/en/blog/news/20201219-congestion-avoidance.md

---
date: 2020-12-19
title: "Exploring Ouroboros with wireshark"
linkTitle: "Exploring Ouroboros with wireshark "
description: ""
author: Dimitri Staessens
---

I recently did some
[quick tests](/blog/2020/12/12/congestion-avoidance-in-ouroboros/#mb-ecn-in-action)
with the new congestion avoidance implementation, and thought to
myself that it was a shame that Wireshark could not identify the
Ouroboros flows, as that could give me some nicer graphs.

Just to be clear, I think generic network tools like tcpdump and
wireshark -- however informative and nice-to-use they are -- are a
symptom of a lack of network security. The whole point of Ouroboros is
that it is _intentionally_ designed to make it hard to analyze network
traffic. Ouroboros is not a _network stack_[^1]: one can't simply dump
a packet from the wire and derive the packet contents all the way up
to the application by following identifiers for protocols and
well-known ports. Using encryption to hide the network structure from
the packet is shutting the door after the horse has bolted.

To write an Ouroboros dissector, one needs to know the layered
structure of the network at the capturing point at that specific point
in time. It requires information from the Ouroboros runtime on the
capturing machine and at the exact time of the capture, to correctly
analyze traffic flows. I just wrote a dissector that works for my
specific setup[^2].

## Congestion avoidance test

First, a quick refresh on the experiment layout, it's the the same
4-node experiment as in the
[previous post](/blog/2020/12/12/congestion-avoidance-in-ouroboros/#mb-ecn-in-action)

{{<figure width="80%" src="/blog/news/20201219-exp.svg">}}

I tried to draw the setup as best as I can in the figure above.

There are 4 rack mounted 1U servers, connected over Gigabit Ethernet
(GbE). Physically there is a big switch connecting all of them, but
each "link" is separated as a port-based VLAN, so there are 3
independent Ethernet segments.  We create 3 ethernet _layers_, drawn
in a lighter gray, with a single unicast layer -- consisting of 4
unicast IPC processes (IPCPs) -- on top, drawn in a darker shade of
gray. The link between the router and server has been capped to 100
megabit/s using ```ethtool```[^3], and traffic is captured on the
Ethernet NIC at the "Server" node using ```tcpdump```.  All traffic is
generated with our _constant bit rate_ ```ocbr``` tool trying to send
about 80 Mbit/s of application-level throughput over the unicast
layer.

{{<figure width="80%" src="/blog/news/20201219-congestion.png">}}

The graph above shows the bandwidth -- as captured on the congested
100Mbit Ethernet link --, separated for each traffic flow, from the
same pcap capture as in my previous post. A flow can be identified by
a (destination address, endpoint ID)-pair, and since the destination
is all the same, I could filter out the flows by simply selecting them
based on the (64-bit) endpoint identifier.

What you're looking at is that first, a flow (green starts), at around
T=14s, a new flow enters (red) that stops at around T=24s. At around
T=44s, another flow enters (blue) for about 14 seconds, and finally, a
fourth (orange) flow enters at T=63s. The first (green) flow exits at
around T=70s, leaving all the available bandwidth for the orange flow.

The most important thing that I wanted to check is that when there are
multiple flows, _if_ and _how fast_ they would converge to the same
bandwidth. I'm not dissatisfied with the initial result: the answers
seem to be _yes_ and _pretty fast_, with no observable oscillation to
boot[^4]

## Protocol overview

Now, the wireshark dissector can be used to present some more details
about the Ouroboros protocols in a familiar setting -- make it more
accessible to some -- so, let's have a quick look.

The Ouroboros network protocol has
[5 fields](/docs/concepts/protocols/#network-protocol):

```
| DST | TTL | QOS | ECN | EID |
```

which we had to map to the Ethernet II protocol for our ipcpd-eth-dix
implementation. The basic Ethernet II MAC (layer-2) header is pretty
simple. It has 2 6-byte addresses (dst, src) and a 2-byte Ethertype.

Since Ethernet doesn't do QoS or congestion, the main missing field
here is the EID. We could have mapped it to the Ethertype, but we
noticed that a lot of routers and switches drop unknown Ethertypes
(and, for the purposes of this blog post here: it would have all but
prevented to write the dissector).  So we made the ethertype
configurable per layer (so it can be set to a value that is not
blocked by the network), and added 2 16-bit fields after the Ethernet
MAC header for an Ouroboros layer:

* Endpoint ID **eid**, which works just like in the unicast layer, to
  identify the N+1 application (in our case: a data transfer flow and
  a management flow for a unicast IPC process).

* A length field **len**, which is needed because Ethernet NICs pad
  frames that are smaller than 64 bytes in length with trailing zeros
  (and we receive these zeros in our code). A length field is present
  in Ethernet type I, but since most "Layer 3" protocols also had a
  length field, it was re-purposed as Ethertype in Ethernet II. The
  value of the **len** field is the length of the **data** payload.

The Ethernet layer that spans that 100Mbit link has Ethertype 0xA000
set (which is the Ouroboros default), the Ouroboros plugin hooks into
that ethertype.

On top of the Ethernet layer, we have a unicast, layer with the 5
fields specified above. The dissector also shows the contents of the
flow allocation messages, which are (currently) sent to EID = 0.

So, the protocol header as analysed in the experiment is, starting
from the "wire":

```
+---------+---------+-----------+-----+-----+------
| dst MAC | src MAC | Ethertype | eid | len | data   /* ETH LAYER */
+---------+---------+-----------+-----+-----+------

   <IF eid != 0 >       /* eid == 0 ->  ipcpd-eth flow allocator, */
                        /*              this is not analysed      */

+-----+-----+-----+-----+-----+------
| DST | QOS | TTL | ECN | EID | DATA             /* UNICAST LAYER */
+-----+-----+-----+-----+-----+------

   <IF EID == 0>                    /* EID == 0 -> flow allocator */

+-----+-------+-------+------+------+-----+-------------+
| SRC | R_EID | S_EID | CODE | RESP | ECE | ... QOS ....|   /* FA */
+-----+-------+-------+------+------+-----+-------------+
```

## The network protocol

{{<figure width="80%" src="/blog/news/20201219-ws-0.png">}}

We will first have a look at packets captured around the point in time
where the second (red) flow enters the network, about 14 seconds into
the capture. The "N+1 Data" packets in the image above all belong to
the green flow. The ```ocbr``` tool that we use sends 1000-byte data
units that are zeroed-out. The packet captured on the wire is 1033
bytes in length, so we have a protocol overhead of 33 bytes[^5]. We
can break this down to:

```
        ETHERNET II HEADER               / 14 /
   6 bytes Ethernet II dst
   6 bytes Ethernet II src
   2 bytes Ethernet II Ethertype
        OUROBOROS ETH-DIX HEADER          / 4 /
   2 bytes eid
   2 byte  len
        OUROBOROS UNICAST NETWORK HEADER / 15 /
   4 bytes DST
   1 byte  QOS
   1 byte  TTL
   1 byte  ECN
   8 bytes EID
 ---    TOTAL                            / 33 /
  33 bytes
```

The **Data (1019 bytes)** reported by wireshark is what Ethernet II
sees as data, and thus includes the 19 bytes for the two Ouroboros
headers. Note that DST length is configurable, currently up to 64
bits.

Now, let's have a brief look at the values for these fields. The
**eid** is 65, this means that the _data-transfer flow_ established
between the unicast IPCPs on the router and the server (_uni-r_ and
_uni-s_ in our experiment figure) is identified by endpoint id 65 in
the eth-dix IPCP on the Server machine. The **len** is 1015. Again, no
surprises, this is the length of the Ouroboros unicast network header
(15 bytes) + the 1000 bytes payload.

**DST**, the destination address is 4135366193, a 32-bit address
that was randomly assigned to the _uni-s_ IPCP. The QoS cube is 0,
which is the default best-effort QoS class. *TTL* is 59. The starting
TTL is configurable for a layer, the default is 60, and it was
decremented by 1 in the _uni-r_ process on the router node. The packet
experienced no congestion (**ECN** is 0), and the endpoint ID is a
64-bit random number, 475...56. This endpoint ID identifies the flow
endpoint for the ```ocbr``` server.

## The flow request

{{<figure width="80%" src="/blog/news/20201219-ws-1.png">}}

The first "red" packet that was captured is the one for the flow
allocation request, **FLOW REQUEST**[^6]. As mentioned before, the
endpoint ID for the flow allocator is 0.

A rather important remark is in place here: Ouroboros does not allow a
UDP-like _datagram service_ from a layer. With which I mean: fabricate
a packet with the correct destination address and some known EID and
dump it in the network. All traffic that is offered to an Ouroboros
layer requires a _flow_ to be allocated. This keeps the network layer
in control its resources; the protocol details inside a layer are a
secret to that layer.

Now, what about that well-known EID=0 for the flow allocator (FA)? And
the directory (Distributed Hash Table, DHT) for that matter, which is
currently on EID=1?  Doesn't that contradict the "no datagram service"
statement above? Well, no. These components are part of the layer and
are thus inside the layer. The DHT and FA are internal
components. They are direct clients of the Data Transfer component.
The globally known EID for these components is an absolute necessity
since they need to be able to reach endpoints more than a hop
(i.e. a flow in a lower layer) away.

Let's now look inside that **FLOW REQUEST** message. We know it is a
request from the **msg code** field[^7].

This is the **only** packet that contains the source (and destination)
address for this flow. There is a small twist, this value is decoded
with different _endianness_ than the address in the DT protocol output
(probably a bug in my dissector). The source address 232373199 in the
FA message corresponds to the address 3485194509 in the DT protocol
(and in the experiment image at the top): the source of our red flow
is the "Client 2" node. Since this is a **FLOW REQUEST**, the remote
endpoint id is not yet known, and set to 0[^8. The source endpoint ID
-- a 64-bit randomly generated value unique to the source IPC
process[^9] -- is sent to the remote. The other fields are not
relevant for this message.

## The flow reply

{{<figure width="80%" src="/blog/news/20201219-ws-2.png">}}

Now, the **FLOW REPLY** message for our request. It originates our
machine, so you will notice that the TTL is the starting value of 60.
The destination address is what we sent in our original **FLOW
REQUEST** -- add some endianness shenanigans.  The **FLOW REPLY**
mesage response sends the newly generated source endpoint[^10] ID, and
this packet is the **only** packet that contains both endpoint IDs
for this flow.

## Congestion / flow update

{{<figure width="80%" src="/blog/news/20201219-ws-3.png">}}

Now a quick look at the congestion avoidance mechanisms. The
information for the Additive Increase / Multiple Decrease algorithm is
gathered from the **ECN** field in the packets. When both flows are
active, they experience congestion since the requested bandwidth from
the two ```ocbr``` clients (180Mbit) exceeds the 100Mbit link, and the
figure above shows a packet marked with an ECN value of 11.

{{<figure width="80%" src="/blog/news/20201219-ws-4.png">}}

When the packets on a flow experience congestion, the flow allocator
at the endpoint (the one our _uni-s_ IPCP) will update the sender with
an **ECE** _Explicit Congestion Experienced_ value; in this case, 297.
The higher this value, the quicker the sender will decrease its
sending rate. The algorithm is explained a bit in my previous
post.

That's it for today's post, I hope it provides some new insights how
Ouroboros works. As always, stay curious.

Dimitri

[^1]: Neither is RINA, for that matter.

[^2]: This quick-and-dirty dissector is available in the
      ouroboros-eth-uni branch on my
      [github](https://github.com/dstaesse/wireshark/)

[^3]: The prototype is able to handle Gigabit Ethernet, this is mostly
      to make the size of the capture files somewhat manageable.

[^4]: Of course, this needs more thorough evaluation with more
      clients, distributions on the latency, different configurations
      for the FRCP protocol in the N+1 and all that jazz. I have,
      however, limited amounts of time to spare and am currently
      focusing on building and documenting the prototype and tools so
      that more thorough evaluations can be done if someone feels like
      doing them.

[^5]: A 4-byte Ethernet Frame Check Sequence (FCS) is not included in
      the 'bytes on the wire'. As a reference, the minimum overhead
      for this kind of setup using UDP/IPv4 is 14 bytes Ethernet + 20
      bytes IPv4 + 8 bytes UDP = 42 bytes.

[^6]: Actually, in a larger network there could be some DHT traffic
      related to resolving the address, but in such a small network,
      the DHT is basically a replicated database between all 4 nodes.

[^7]: The reason it's not the first field in the protocol has to to
      with performance of memory alignment in x86 architectures.

[^8]: We haven't optimised the FA protocol not to send fields it
      doesn't need for that particular message type -- yet.

[^9]: Not the host machine, but that particular IPCP on the host
      machine. You can have multiple IPCPs for the same layer on the
      same machine, but in this case, expect correlation between their
      addresses. 64-bits / IPCP should provide some security against
      remotes trying to hack into another service on the same host by
      guessing EIDs.

[^10]: This marks the point in space-time where I notice the
       misspelling in the dissector.