summaryrefslogtreecommitdiff
path: root/src/tools
Commit message (Collapse)AuthorAgeFilesLines
...
* ipcpd: Add IPCP over DIX EthernetDimitri Staessens2018-03-101-8/+32
| | | | | | | | | | | | | | | | | | This adds an IPC Process that uses DIX Ethernet with an Ethertype that is configurable at bootstrap. This allows parallel DIX layers over the same Ethernet network with different Ethertypes (and one LLC layer). It allows jumbo frames in the future, and should avoid the problems we have with some routers not handling LLC traffic very well. The destination endpoint ID is sent as a 16 bit integer, so the maximum payload is 1498 bytes in standard Ethernet, and 8998 bytes when Jumbo frames are used. The implementation is very similar to the Ethernet LLC IPCP, so it is implemented using preprocessor macros in the single source instead of duplicating code. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Use PTHREAD_COND_CLOCK for blocking reads0.10.6Dimitri Staessens2018-03-101-2/+5
| | | | | | | | | | | The rbuff uses the PTHREAD_COND_CLOCK for its condition variables, but the flow_read was passing a time it got from the CLOCK_REALTIME_COARSE clock. This causes the blocking reads not to timeout correctly. The oping was updated to detect server timeouts and finish gracefully. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* tools: Don't cancel reader thread in oping0.10.5Dimitri Staessens2018-03-051-2/+0
| | | | | | | | The reader thread was cancelled as soon as the writer was finished, which resulted in missed responses and misreported packet loss. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* build: Allow out-of-tree build of toolsDimitri Staessens2018-02-1417-57/+150
| | | | | | | | | | This removes the dependencies for the tools on some ouroboros internal headers (endian.h and time_utils.h) so they can be built out-of-tree. The echo-app tool has been renamed oecho and the cbr tool has been renamed ocbr. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Revise Data Transfer component0.10.0Dimitri Staessens2018-02-136-55/+57
| | | | | | | | | | | This makes the TTL non-optional and allows the maximum (initial) value of the TTL to be specified at bootstrap (the default is set to 60). The fd in the DT PCI is now called EID (Endpoint ID). The names "dif" and "ae" have been replaced by "layer" and "component" respectively in all sources. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* build: Use GNUInstallDirs instead of hardcoded values0.9.9Sander Vrijders2018-02-065-5/+5
| | | | | | | | This changes the build to use GNUInstallDirs instead of hardcoded values. Package maintainers can then override these defaults by passing the correct value to cmake on the command line. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* tools: Fix check for return value in irm tool0.9.7Sander Vrijders2018-02-031-1/+1
| | | | | | | | A check was done in the irm tool for the pid of a newly created IPCP, but it didn't catch all failures, this fixes that. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* include, src: Update copyright to 2018Dimitri Staessens2018-01-0931-31/+31
| | | | | | | Happy New Year, Ouroboros. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Use the term "layer" and deprecate "shim"Dimitri Staessens2017-12-195-41/+41
| | | | | | | | | | | | | | This changes the terminology to use layer instead of DIF and deprecate the word "shim" for the IPCPs that attach to Ethernet LLC and UDP .The terminology has not yet been changed in the variable names etc. This reflects the design choices in Ouroboros to make IPCPs pure resource allocators instead of also providing an "IPC service". The Ouroboros IPCPs that attach to Ethernet and UDP implement the allocator and are thus not really shims. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Integrate raptor into ouroboros 0.8Dimitri Staessens2017-12-152-6/+17
| | | | | | | | | | | The raptor code is refactored to completely remove reduntant code relating to addresses. The dependency on the google protocol buffers is removed. The build system will only build raptor if the relevant kernel module is found on the system. The irm tool and the relevant documentation are updated. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Make hash algorithm configurableSander Vrijders2017-12-041-3/+11
| | | | | | | | | | This makes the hashing algorithm configurable once more for the local and the shim-eth-llc, since their scope is so small that it is up to the network administrator to select a correct algorithm for the whole network. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* lib, tools: Rename application process and instanceDimitri Staessens2017-12-0219-150/+165
| | | | | | | | | | | This refactors ouroboros to use "program" instead of "application process" and "process" instead of "application process instance" to align with current naming in current Operating Systems courses instead of the ISO nomenclature adopted by RINA. This change permeates through the entire implementation. Also contains some minor other refactors. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Don't bind from the IPCPDimitri Staessens2017-11-292-16/+64
| | | | | | | | | | The binding of the normal IPCP to its name is moved from the source code to the irm tool introducing the "autobind" option for the bootstrap and enroll commands. With this option, the IPCP will be bound to the IPCP name and the DIF name automatically. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* tools: Fix SEGV in oping clientDimitri Staessens2017-11-221-4/+8
| | | | | | | | | | | The oping client tried to cancel non-created pthreads if it was killed during flow allocation, which caused a SEGV. The threads are now stopped using a variable. Fixes bug #2. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* tools: Send time in oping packetsDimitri Staessens2017-11-192-38/+23
| | | | | | | | The oping tool now stores the time it sent the packet inside the SDU, simplifying the implementation. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* tools: Check process id when binding a processSander Vrijders2017-11-151-1/+11
| | | | | | | | This adds a check that the passed process id is in fact a number and not gibberish. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* tools: Remove comment lines in CBRSander Vrijders2017-10-241-2/+0
| | | | | | | There were unnecessary comment lines in cbr.c, this removes them. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* tools: Change license to 3 clause BSDDimitri Staessens2017-10-2431-310/+808
| | | | | | | | | A more permissive license is needed on the tools since they serve as example code for programs built on top of the ouroboros-dev and ouroboros-irm libraries. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* tools: Refactor echo to single source fileDimitri Staessens2017-10-243-127/+73
| | | | | | | | This simplifies the echo-app tool implementation to a single source file since it's meant to be a small example application. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* Merged in dstaesse/ouroboros/be-deprecate-ouroboros-init-fini (pull request ↵dimitri staessens2017-10-1410-72/+7
|\ | | | | | | | | | | #626) Be deprecate ouroboros init fini
| * lib: Deprecate ouroboros_init and ourboros_finidimitri staessens2017-10-1410-72/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit deprecates ouroboros_init and ouroboros_fini and adds them as a constructor or destructor, causing these function to be run automatically when a program that links to the library calls and exits main(). For this to fully work, the library had to be split so that we can avoid the irmd calling these functions (the IRMd has to create the shm structures on which these calls depend). The library is split in 3 parts: libouroboros-dev, libouroboros-irm and libouroboros-common. The latter is linked to the other two so that including libouroboros-dev or libouroboros-irm will also link libouroboros-common.
* | lib: Re-enable multi-block supportdimitri staessens2017-10-131-2/+2
|/ | | | | | Multi-block support was forgotten during the update of the build system. This enables it again and fixes some bugs when it is disabled and larger SDUs are sent.
* ipcpd: normal: Add Loop-Free Alternates routingSander Vrijders2017-09-291-23/+28
| | | | | | This adds the Loop-Free Alternates (LFA) policy. In case a link goes down a LFA may be selected to route the SDUs on without causing loops instead of the main hop that just went down.
* ipcpd: normal: Add alternate hop PFFSander Vrijders2017-09-211-35/+41
| | | | | This adds a PFF that returns an alternate hop as next hop in case the hop that would have been returned is down.
* ipcpd: normal: Make PFF policy-basedSander Vrijders2017-09-201-2/+12
| | | | | This turns the PDU Forwarding Function of the IPCP into a policy. For now only the simple PFF policy is available.
* lib: Add fccntl configuration commanddimitri staessens2017-08-314-7/+7
| | | | | | | This replaces the flow_set_* commands with a single fccntl command that can configure flows and the FRCT instance. For more details, see "man 3 fccntl".
* tools: irm: Fix matching of name parameterSander Vrijders2017-08-294-14/+15
| | | | | The name parameter was not being matched correctly in ipcp connect and disconnect.
* dev: Revise fqueue API and add man pagesdimitri staessens2017-08-294-25/+24
|
* tools: Add tool to connect IPCP componentsdimitri staessens2017-08-285-8/+206
| | | | | | | | | | | | This enables user-written tools to instruct IPCPs to establish and tear down connections (a.k.a. adjacencies) between its internal components (Management and Data Transfer). For more info, do "irm ipcp connect" or "irm ipcp disconnect" on the command line. This commit exposes a deletion bug in the RIB where FSO's fail to unpack/parse. This will be fixed when the RIB is deprecated.
* ipcpd: Deprecate gam as autonomous componentdimitri staessens2017-08-281-24/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The graph adjacency manager has been deprecated in favor of providing an external interface into the connectivity manager so that adjacencies can be controlled from the command line, user scripts or user applications. The gam and its associated policies were removed from the normal IPCP and the IRM configuration tools. The "/members" part of the RIB was deprecated. Removal of the gam means that initial connectivity based on changes in the RIB can't be provided, so some changes were required throughout the normal IPCP. The enrollment procedure was revised to establish its own connectivity. First, it gets boot information from a peer by establishing a connection to the remote enrollment component and downloading the IPCP configuratoin. This is now done using its own protocol buffers message in anticipation of deprecation of the RIB and CDAP for communication within a DIF. After the boot information is downloaded, it establishes a data transfer flow for enrolling the directory (DHT). After the DHT has enrolled, it signals the peer to that enrollment is done, and the data transfer connection is torn down. Signaling connections is done via the nbs struct, which is now passed to the connmgr, which enables control of the connectivity graph from external sources.
* build: Revise the build systemdimitri staessens2017-08-217-16/+4
| | | | | | | | | | This revises the build system to have configuration per system component. System settings can now be set using cmake. The standard compliance defines were removed from configuration header and are set in the sources where needed. Also some small code refactors, such as moving the data for shims out of the ipcp structure to the respective shims were performed.
* build: Replace fsf snail mail with contact URLdimitri staessens2017-08-1331-31/+31
|
* lib, ipcpd, tools: Fix enum assignmentsSander Vrijders2017-08-101-6/+5
| | | | This fixes several assignments to the wrong enum type.
* build, lib, ipcpd, irmd: Add support for libgcryptdimitri staessens2017-08-091-9/+4
| | | | | | | | | | | | | | | | This adds support for libgcrypt. If at least version 1.7.0 of libgcrypt is present, it may be used for secure random number generation and is used for hashing in the irmd/ipcp. The hash definitions are moved to the internal hash.h header, and defined independently of the hashes that are defined as part of the directory policy for the normal IPCP. The translation is moved from the IRMd to ipcpd/ipcp.h. The bootstrap call from the IRMd expects the IPCP to return the correct hash algorithm with a dif_info struct, which is in line with the behavior of the enroll call. This also improves how some platform checks in the build system are handled.
* ipcpd, lib, irmd: Hardcode shim hash algorithmsSander Vrijders2017-07-121-39/+42
| | | | | | | This will hardcode the shim hash algorithms as they don't have an enrollment phase. Fixes #44
* ipcpd: normal: Make routing a policySander Vrijders2017-05-151-13/+21
| | | | | | This makes the routing component into a policy since different approaches may exist to do this, depending on how high the rank of the DIF is.
* ipcpd: Allow specifying fixed syntaxdimitri staessens2017-05-151-85/+52
| | | | | | This commits adds the functions and messages to specify a fixed protocol syntax during CACEP. It also revises the messages for specifying the DT protocol syntax from the irm tool.
* ipcpd: Allow specifying the hash algorithm to usedimitri staessens2017-04-161-42/+71
| | | | Currently CRC32, MD5, and SHA3 (224, 256, 384 and 512 bit) are supported.
* include, lib: Rename ap_init/ap_finidimitri staessens2017-04-135-13/+13
| | | | Fixes #35
* lib, ipcpd, irmd: Register hash instead of namedimitri staessens2017-04-131-4/+8
| | | | | | | | | All information passed over the IRMd/IPCP boundary for using IPC services (flow allocation, registration) is now hashed. This effectively fixes the shared namespace between DIFs and the IRMDs. This PR also fixes some API issues (adding const identifiers), shuffles the include headers a bit and some small bugs.
* tools: Fix oping client outputdimitri staessens2017-04-031-2/+2
|
* tools: oping: Fix bad calculationSander Vrijders2017-04-011-1/+1
| | | | This fixes a potential overflow when calculating the packet loss.
* lib: Revise flow allocation APIdimitri staessens2017-03-318-86/+36
| | | | | | The flow_alloc_res and flow_alloc_resp calls have been removed. The flow_alloc and flow_accept calls are now both blocking and take an additional timeout argument.
* Change email addresses to ugent.beSander Vrijders2017-03-0331-67/+108
| | | | | | | Our mailserver was migrated from intec.ugent.be to the central ugent.be emailserver. This PR updates the header files to reflect this change as well. Some header files were also homogenized if the parameters within the functions were badly aligned.
* build: Format CMakeLists.txt filesSander Vrijders2017-03-035-33/+33
| | | | The CMakeLists files are now properly indented.
* lib: Remove application entity nameSander Vrijders2017-02-248-8/+8
| | | | | The AE name should not be passed over the layer boundaries. If an application has more than one AE it should exchange this in CACEP.
* tools: Continue oping server after failed writedimitri staessens2017-02-221-3/+1
| | | | | | When hammering the oping thread, it will have write fails when the buffer gets full as its flow is non-blocking. It would stop and deallocate the flow, but should just continue.
* tools: Fix overflow bug in opingdimitri staessens2017-02-221-9/+10
| | | | | | Sometimes the receiver thread got the SDU before the writer thread has set the sent time when testing over the local. The sent time is now written before actually sending to avoid this.
* lib, tools, ipcpd: Fix compilation on FreeBSDdimitri staessens2017-02-091-0/+1
| | | | | | | | | | | | FreeBSD defines its own bswap64 in the <sys/endian.h> header, which is now included correctly. POSIX requires XSI or RTS extensions to be enabled for the sa_sigaction field to be visible. Linux doesn't do the check correctly, but FreeBSD does. Removes the LOG_MISSING call which was deprecated with the last revision of the logging system.
* ipcpd, lib: Revise normal IPCPdimitri staessens2017-02-061-1/+10
| | | | | | | | | | This PR updates the normal IPCP to use the new RIB. The old ribmgr is removed and replaced by a stub that needs to be implemented. All components (dir, fmgr, frct) were adapted to the new RIB API. A lot of functionality was moved outside of the ribmgr, such as the addr_auth, which is now a component of the IPCP. The address is also stored to the ipcpi struct. The irm tool has an option to set the gam policy of the rib manager.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 01:49:33 +0000