summaryrefslogtreecommitdiff
path: root/src/lib
Commit message (Collapse)AuthorAgeFilesLines
...
* lib: Revise FRCT reorderingDimitri Staessens2018-06-045-249/+47
| | | | | | | | The reordering queue is replaced by a fixed ring buffer for speed and simplicity. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Mark flows as down on ipcp_flow_fini()Dimitri Staessens2018-05-301-34/+35
| | | | | | | | | | The flow_fini() function was marking flows as wronly (so rdonly for the application) when the flow was deallocated. With the recent addition of the flowdown state, we can now mark them as down. Also fixes some bounds checks and alignment. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Fix potential memleak in rdrbuffDimitri Staessens2018-05-271-2/+4
| | | | | | | | The rdrb struct should be freed when destroying the rdrbuff, even when the actual shared memory is not unlinked. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Use IPCP name as RIB directoryDimitri Staessens2018-05-151-2/+2
| | | | | | | | This will change the FUSE mountpount to the name of the IPCP instead of a generic name based on its pid. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Add event types to fqueueDimitri Staessens2018-05-142-37/+53
| | | | | | | | | | | The event type of the current event in the fqueue can now be requested using the fqueue_type() command. Currently events for packets (FLOW_PKT), flows (FLOW_UP, FLOW_DOWN) and allocation (FLOW_ALLOC, FLOW_DEALLOC) are specified. The implementation only tracks FLOW_PKT at this point. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Make UNIX socket buffer size configurable0.11.3Sander Vrijders2018-05-031-4/+11
| | | | | | | | | | This makes the buffer size used by the UNIX sockets configurable. In case of a lot of IPCPs in the system it might become too small with the default value, resulting in irm command failures. The user can now easily configure it with an adequate value. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* lib: Shut rx buffer down before cleanup and exitDimitri Staessens2018-04-261-0/+1
| | | | | | | | | | If a program exits, it cleans its read buffer. However, another process could still write a packet in that buffer, which would cause the IPCP or IRMd to run into an assertion failure on shutdown. Setting the rbuff to ACL_FLOWDOWN prevents this. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Unmount stale FUSE mountpointsDimitri Staessens2018-04-261-1/+10
| | | | | | | | This will unmount a stale FUSE mountpoint (an IPCP with the same pid exited ungracefully on the system) before trying to create it. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Fix bad unlinking of old shared memorySander Vrijders2018-04-251-5/+1
| | | | | | | | | | A previous commit tried to stat the shared memory file in case it was already there, but stat does not seem to work for shared memory files. This simply omits the O_EXCL attribute upon creation of the shared memory file, since pids are unique anyway. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* lib: Unlink old flow set shared memorySander Vrijders2018-04-251-0/+4
| | | | | | | | | This unlinks previously allocated flow set shared memory. It could be lingering in case an application with the same pid was SIGKILLED, and didn't clean up its flow set shared memory. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* ipcpd: Avoid unnecessary copy in eth readerDimitri Staessens2018-04-051-1/+1
| | | | | | | | | This reads from the Ethernet device directly into the rdrbuff to avoid a copy on the read side in the Ethernet IPCPs. This does not work for the netmap device. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* irmd: Fix memleak when failing to list ipcpsDimitri Staessens2018-03-221-10/+10
| | | | | | | | | The list_ipcps call had a memleak in the failure case. Also fixes a compiler warning for a possible uninitialized variable and renumbers the gpb ipcpd message fields. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Simplify reg/unreg APIDimitri Staessens2018-03-224-94/+95
| | | | | | | | | | | | | | | | | | | | The reg/unreg API is simplified to registering and unregistering a single name with a single IPCP. The functionality associated with registering names was moved from the IRMd to the irm tool. The function to list IPCPs was simplified to return all IPCPs in the system with their basic properties needed for management. The above changes led to some needed changes in the irm tool and the management functions that were depending on the previous behaviour of list_ipcps. Command line functionality to list IPCPs in the system is also added to the irm tool. Some older code was refactored. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Allow disabling partial readDimitri Staessens2018-03-191-6/+14
| | | | | | | | | | | | | | This allows disabling partial reads. It adds a flag FLOWFRNOPART that disables partial reads. Partial read is different from partial delivery (FRCTFPARTIAL), which allows delivery of fragments of an incomplete packet and thus potentially corrupted data. FLOWFRNOPART will never deliver corrupted data (unless FRCTFPARTIAL is also set). If FLOWFRNOPART is set and the buffer provided to flow_read is too small for the SDU, that SDU will be discarded and -EMSGSIZE is returned; Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Simplify some code in rdrbuffDimitri Staessens2018-03-161-8/+2
| | | | | | | This simplifies some functions in the rdrbuff. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Use sequenced datagrams with UNIX socketsSander Vrijders2018-03-131-2/+2
| | | | | | | | The UNIX sockets were using SOCK_STREAM, which does not preserve the message boundaries. This switches to SOCK_SEQPACKET. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* lib: Allow partial readDimitri Staessens2018-03-121-20/+39
| | | | | | | | | | | | | This implements partial read of packets if the buffer supplied to flow_read() is smaller than the packet in the buffer. If the number of bytes returned by flow_read equals the size of the buffer, the next read() will deliver the next bytes of the packet (or 0 if the packet was exactly the size of the buffer on the previous read). Implements #7. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Implement timeout on blocking writeDimitri Staessens2018-03-122-34/+57
| | | | | | | | | | This completes the implementation of the SNDTIMEO for a blocking write. Fixes #6. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Add IPCP over DIX EthernetDimitri Staessens2018-03-102-3/+10
| | | | | | | | | | | | | | | | | | This adds an IPC Process that uses DIX Ethernet with an Ethertype that is configurable at bootstrap. This allows parallel DIX layers over the same Ethernet network with different Ethertypes (and one LLC layer). It allows jumbo frames in the future, and should avoid the problems we have with some routers not handling LLC traffic very well. The destination endpoint ID is sent as a 16 bit integer, so the maximum payload is 1498 bytes in standard Ethernet, and 8998 bytes when Jumbo frames are used. The implementation is very similar to the Ethernet LLC IPCP, so it is implemented using preprocessor macros in the single source instead of duplicating code. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Use PTHREAD_COND_CLOCK for blocking reads0.10.6Dimitri Staessens2018-03-101-1/+1
| | | | | | | | | | | The rbuff uses the PTHREAD_COND_CLOCK for its condition variables, but the flow_read was passing a time it got from the CLOCK_REALTIME_COARSE clock. This causes the blocking reads not to timeout correctly. The oping was updated to detect server timeouts and finish gracefully. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Add fccntl operation to get queue lengthsDimitri Staessens2018-02-281-0/+9
| | | | | | | | | | This adds the FLOWGRXQLEN and FLOWGTXQLEN operations to fccntl to get the number of packets that are in the receive and transmit buffers respectively. The flow statistics are updated to show these queue lengths. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Fix FUSE access for non-root users0.10.4Dimitri Staessens2018-02-261-10/+7
| | | | | | | | | | This fixes the access to the RIB for non-root users. Thanks to Sitri and Dagger from the ##fuse channel for their assistance. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* build: Reduce default buffer size to 4096 blocksDimitri Staessens2018-02-261-2/+1
| | | | | | | | This reduces the default buffer size to 4096 blocks (about 16MB). This will avoid problems when users try a default build on smaller machines. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Fix double definition of ipcp configDimitri Staessens2018-02-231-0/+14
| | | | | | | | | | The import of the IPCP config protobuf message in the enrollment message caused a double definition. The enroll.proto file is deprecated and the definition of the enrollment message is moved to the library to avoid this. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Ignore void return value for gcry_randomizeDimitri Staessens2018-02-231-1/+2
| | | | | | | | The libgcrypt gcry_randomize function returns void which was returned as an int, which gives warnings on some compilers. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Get RIB attributes from componentDimitri Staessens2018-02-201-23/+47
| | | | | | | | | | | | This revises the RIB so it gets the complete file attribute list from the component instead of setting some attributes in the library. This will allow setting read/write access later on in the component itself. The time of last change of lsdb entries in the file system is now set to the time of the last received Link State Update for that entry. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Revise Data Transfer component0.10.0Dimitri Staessens2018-02-137-69/+68
| | | | | | | | | | | This makes the TTL non-optional and allows the maximum (initial) value of the TTL to be specified at bootstrap (the default is set to 60). The fd in the DT PCI is now called EID (Endpoint ID). The names "dif" and "ae" have been replaced by "layer" and "component" respectively in all sources. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* build: Use GNUInstallDirs instead of hardcoded values0.9.9Sander Vrijders2018-02-061-3/+3
| | | | | | | | This changes the build to use GNUInstallDirs instead of hardcoded values. Package maintainers can then override these defaults by passing the correct value to cmake on the command line. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Fix assertions in timerwheel0.9.6Sander Vrijders2018-01-291-2/+2
| | | | | | | | The previous commit only fixed the issue for release builds. This fixes it for debug builds as well. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* lib: Fix bad comparison in timerwheel0.9.5Sander Vrijders2018-01-291-3/+3
| | | | | | | | A comparison was done in the timerwheel between an unsigned value and a time_t. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* lib: Fix bad lock in dev.c0.9.2Dimitri Staessens2018-01-221-1/+1
| | | | | | | | There was a rdlock() instead of an unlock(). This fixes #3. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* include, src: Update copyright to 2018Dimitri Staessens2018-01-0945-45/+45
| | | | | | | Happy New Year, Ouroboros. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Use the term "layer" and deprecate "shim"Dimitri Staessens2017-12-192-4/+4
| | | | | | | | | | | | | | This changes the terminology to use layer instead of DIF and deprecate the word "shim" for the IPCPs that attach to Ethernet LLC and UDP .The terminology has not yet been changed in the variable names etc. This reflects the design choices in Ouroboros to make IPCPs pure resource allocators instead of also providing an "IPC service". The Ouroboros IPCPs that attach to Ethernet and UDP implement the allocator and are thus not really shims. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Integrate raptor into ouroboros 0.8Dimitri Staessens2017-12-151-0/+1
| | | | | | | | | | | The raptor code is refactored to completely remove reduntant code relating to addresses. The dependency on the google protocol buffers is removed. The build system will only build raptor if the relevant kernel module is found on the system. The irm tool and the relevant documentation are updated. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib, tools: Rename application process and instanceDimitri Staessens2017-12-0214-234/+240
| | | | | | | | | | | This refactors ouroboros to use "program" instead of "application process" and "process" instead of "application process instance" to align with current naming in current Operating Systems courses instead of the ISO nomenclature adopted by RINA. This change permeates through the entire implementation. Also contains some minor other refactors. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Refactor shm_rdrbuff and shm_rbuffDimitri Staessens2017-11-304-497/+286
| | | | | | | | | | This refactors the creation of shm_rdrbuff and shm_rbuff elements. All cleanup is now handled and the common code between the _open() and _create() calls is moved to a static function. Common code between the pthread and lockless rbuff implementations was moved to shm_rbuff.c Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd, irmd: Bugfix for failed accept() callsDimitri Staessens2017-11-291-1/+2
| | | | | | | | | The ipcp will not have the rx_rb set for a pending flow, so it should not call shm_rbuff_fini. The irmd should not call ipcp_flow_dealloc for flows that are still pending flow allocation. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Fix init and fini ELF sections for OS XDimitri Staessens2017-11-201-2/+10
| | | | | | | OS X uses a different syntax for specifying ELF sections. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Add library initializers to .init_arrayDimitri Staessens2017-11-201-4/+7
| | | | | | | | | | The library initializers with argc and argv arguments were specified using the __attribute__((constructor)). This is undefined behaviour as constructors should have no arguments. This is fixed by passing the functions to the .init_array. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* build: Fix setting configuration definitionsDimitri Staessens2017-11-181-0/+5
| | | | | | | | Variable in cache need to be explicitly unset else they will remain in the cache and still be defined by #cmakedefine. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* build: Add options for debug builds with sanitizerDimitri Staessens2017-11-141-2/+2
| | | | | | | | | This adds three build types, DebugASan, DebugTSan and DebugLSan that enable the Address, Thread and Leak Sanitizer by setting the fsanitize flag to the compiler. This option is supported by both gcc and clang. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* build: Set libraries for OpenSSL when not foundDimitri Staessens2017-11-141-0/+1
| | | | | | | | | The build didn't reset the CMake variable for OPENSSL_LIBRARIES, causing bad input to the linker. This error showed up when trying to build on XUbuntu 17.10 without OpenSSL or libgrcypt installed. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* build: Avoid duplicate definitions in librariesDimitri Staessens2017-11-131-4/+2
| | | | | | | | There were sources defined in multiple libraries. This issue was reported by the address sanitizer on FreeBSD. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Use correct names for st_modes in RIBDimitri Staessens2017-11-101-6/+8
| | | | | | | | | The RIB implementation was using internal variables from the linux implementation instead of the POSIX defined macros. The POSIX defined macros require defining __USE_XOPEN to access them. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Fix FRCT sequence number network endiannessDimitri Staessens2017-11-092-4/+9
| | | | | | | | Endianness conversion from/to the network for the sequence number was missing in 68694bc. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Use packed struct for FRCT header accessDimitri Staessens2017-11-086-259/+140
| | | | | | | | | | | | | | | This replaces the variable FRCT header with a packed struct, which significantly simplifies the implementation. The shm_du_buff calls to release the head/tail are updated to return a pointer to the original head or the new tail (in symmetry to the alloc calls, which return a pointer to the new head and old tail), so that it immediately points to the structure that is needed. The frct_pci sources are removed and frct is now fully in the frct.c source file. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Refactor FRCT implementationDimitri Staessens2017-11-077-543/+683
| | | | | | | | | | | | | | | | | | | | The frct_pci and rq headers are moved from include/ouroboros to src/lib since they are only needed in the library. FRCT is moved to its own source file. FRCT takes the application PDUs, encapsulates and processes them and hands them back. This makes it easier to disable FRCT should the application want to write to a "raw" flow. An FRCT instance is now allocated upon alloc and released upon dealloc. The FRCT data structure is split into a sender and receiver connection record. Setting a new configuration will now be done upon sending the next data PDU, which will flag the DRF for a new run and use that configuration. This avoids some issues should packets arrive out-of-order, and simplifies setting a configuration. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* dev: Split nonblocking read and writeDimitri Staessens2017-10-301-2/+2
| | | | | | | | | | The FLOWFNONBLOCK flag now has two subflags FLOWFRNOBLOCK and FLOWFWNOBLOCK which allows setting the behavior of read and write independently. The default behavior is unchanged (blocking read and write). Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* dev: Bind python scripts to script nameDimitri Staessens2017-10-251-0/+13
| | | | | | | | | | This revises the library init script so that it checks whether the program is run by a python executable (python, python2 or python3) and announces the script name instead of the python interpreter. This enables binding python scripts. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Fix exit bug in dev.cdimitri staessens2017-10-231-0/+4
| | | | | | | | | | If the library init() fails, the fini() call tries to access unreleased resources. The fix resets the ai struct to 0 if init() fails and checks a heap pointer for NULL before the fini() accesses internals. Signed-off-by: dimitri staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 04:48:40 +0000