summaryrefslogtreecommitdiff
path: root/src/lib/tests
Commit message (Collapse)AuthorAgeFilesLines
* lib: Add support for NIST curve hybrid KEMsDimitri Staessens31 hours1-4/+6
| | | | | | | | OpenSSL 3.5 supports SecP256r1MLKEM768 and SecP384r1MLKEM1024 pairing ML-KEM with a NIST curve. These were not supported yet by O7s. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Improve hybrid KEX supportDimitri Staessens31 hours2-15/+12
| | | | | | | | | | | | | | | | | | | | The algorithm was inferred from the key length. That will not always work as SecP256r1MLKEM768 private key is 2432 bytes, exactly like an X25519MLKEM768 one. Raw OAP kex payloads now lead with the algorithm NID in network byte order, so a peer reads the algorithm from the wire instead of guessing it from the payload length. Test if the KEX is hybrid KEM with kex_nid_is_hybrid() based on the NID range. The configured algorithm is passed to the raw key loaders. The public key loader imports the key to validate it, so a corrupt or mismatched file is reported at load time. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* ipcpd: Use capacity queue estimation for mb-ecnDimitri Staessens31 hours2-0/+428
| | | | | | | | | | | The mb-ecn algorithm was using rbuff queue depths in packets to mark, but sockets in the poa component report capacity in bytes. The tx rings are now adaptive to block on queuing delay instead of when full to prevent buffer bloat, controllable via fccntl (FLOWSTXQDLY and FLOWGTXQDLY). Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Replace shim IPCPs with points of attachmentDimitri Staessens31 hours2-0/+314
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removes the UDP and Ethernet shim IPCPs. The unicast and broadcast IPCPs can now directly attach to a "legacy" socket. We adopt Saltzer's Point-of-Attachment terminology, also advocated in Day's "Patterns in Network Architecture". The "poa" component manages these PoA's with one management thread, one link monitoring thread and one thread per attached point. For Ethernet PoA's the irm connect and enroll can resolve the destination IPCP or Layer name with a broadcast name query over the attached PoAs (first reply wins). UDP PoA's require a destination IP address or FQDN. attach to a local endpoint (required both server and client side): irm ipcp poa attach name a udp 10.0.0.1 irm ipcp poa attach name a udp 10.0.0.1:3435 irm ipcp poa attach name a udp [::1]:3435 irm ipcp poa attach name a eth dev eth0 irm ipcp poa attach name a eth dev eth0 ethertype 0xA000 release a PoA (refused while it carries a flow): irm ipcp poa detach name a udp 10.0.0.1:3435 irm ipcp poa detach name a eth eth0 list an IPCP's PoAs: irm ipcp poa list name a connect to a peer, by name or at an address: irm ipcp connect name b dst a irm ipcp connect name b dst a eth irm ipcp connect name b dst a eth dev eth0 irm ipcp connect name b dst a udp 10.0.0.1:3435 irm ipcp connect name b dst a udp peer.example.com:3435 disconnect by peer name, no address: irm ipcp disconnect name b dst a irm ipcp disconnect name b dst a component mgmt enroll has the same shape as connect: irm ipcp enroll name b layer lr autobind irm ipcp enroll name b layer lr autobind eth dev eth0 irm ipcp enroll name b layer lr autobind udp 10.0.0.1:3435 the IRMd config file attaches PoAs and names peers the same way: udp = [ "10.0.0.1", "10.0.0.1:3436" ] eth = [ "eth0", {dev="eth1", ethertype=0xA007} ] enrol={dst="LAN", eth={dev="eth0"}} conn=[{dst="lan3", eth={}}, {dst="lan4", udp="10.0.0.1:3435"}] Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Make crypt contexts thread-safeDimitri Staessens31 hours2-4/+64
| | | | | | | | | Moves the per-packet EVP context to a thread-local state. Now refuses a security config with -ENOTSUP without supported crypto backend (OpenSSL). Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Fix crypt_test without crypto backendDimitri Staessens2026-07-191-0/+8
| | | | | | | | | Creating a context without OpenSSL fails (returns NULL) after adding the key rotation logic (requires HKDF). Assert instead that context creation returns NULL without OpenSSL. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Separate rekey replay from epoch conflictDimitri Staessens2026-07-081-6/+17
| | | | | | | | | | | | | keyrot_rekey() treated any re-key attempt against a live epoch (current or previous) the same way, whether the offered root key matched the live one (a replay) or was genuinely different (a conflict). Compare the offered key against the live batch's root and return -EREPLAY for a match, keeping -1/-ECRYPT for an actual conflict, so callers can handle replayed re-keys distinctly from real ones. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Harden crypto unit testsDimitri Staessens2026-07-083-5/+103
| | | | | | | | | | | | | | Stop the non-OpenSSL runners from masking a real failure as SKIP by only downgrading to SKIP if they passed. Fix a stray call that ran test_kex_dhe_wrong_algo in the skip branch. Fix double free + free of an uninitialised pointer in test_store_add. Test that a KDF- less derive must fail. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Reject re-key to a live epochDimitri Staessens2026-07-081-12/+152
| | | | | | | | A re-key epoch arrives from the peer, so we need to reject duplicates to avoid two batches sharing a wire epoch with different keys. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Fix OpenSSL version check for PQCDimitri Staessens2026-07-084-4/+4
| | | | | | | | | ML-KEM, ML-DSA and SLH-DSA all landed in OpenSSL 3.5.0, not 3.4.0. ML-KEM+ML-DSA and SLH-DSA can be disabled by DISABLE_ML / DISABLE_SLH. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Group sec_config authentication fieldsDimitri Staessens2026-06-291-8/+8
| | | | | | | | | Nest the flat req_auth and cacert members of struct sec_config into a sub-struct a { req; cacert; }, keeping the authentication settings together. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Harden OpenSSL crypto backendDimitri Staessens2026-06-291-0/+4
| | | | | | | | | | | | | | | This contains a few improvements and fixes in the OpenSSL backed. We now zeroize shared secrets with OPENSSL_clear_free. The i2d_PUBKEY output is bound against CRYPT_KEY_BUFSZ. We now return NULL rather than silently falling back to SHA-256 when a digest is unknown. FILE handles are now closed via pthread cleanup so a cancelled thread cannot leak them. The DHE kex tests now set the KDF NID explicitly, since the SHA-256 fallback is gone. Also refactors the PEM string loaders to clean up some code duplication. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Add MurmurHash3 hash_mix64 for hash tablesDimitri Staessens2026-06-291-0/+37
| | | | | | | | | Adds a (non-cryptographic) MurmurHash3 fmix64 finalizer for hashing an integer key to a table index, replacing the MD5-based bucket hashing in the pft. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Harden symmetric-key rotationDimitri Staessens2026-06-293-167/+1350
| | | | | | | | | | | | | | | | | | Flow crypto signalled rotation with a single phase-parity bit, so a loss burst that hid an even number of rotations went unnoticed and wedged the flow for good. Each packet now carries a small cleartext selector naming its key directly, so a receiver that falls behind recovers on the next packet instead of getting stuck. The selector also serves as the AEAD nonce and is authenticated as associated data (AAD). Key rotation moves into a new backend-agnostic keyrot module that rotates sub-keys to bound AEAD usage while preserving forward secrecy. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* irmd: Reject OAP peer crt with unusable CNDimitri Staessens2026-06-291-0/+46
| | | | | | | Added checks for CN > NAME_SIZE. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* irmd: Add issuer and digest pinning to OAPDimitri Staessens2026-06-292-0/+177
| | | | | | | | | | | | | | | | | | | A peer certificate that verifies against the CA store could have been issued by any trusted CA, and a peer could pick any supported digest for its signature. Tighten the authentication contract with two local policies. cacert= pins the issuing CA: a peer certificate, if presented, must chain through the pinned CA. Whether a certificate is mandatory at all remains controlled by auth= alone. digest= now also pins the signature digest: a classical peer must sign with the locally configured digest, and may not omit the digest NID to fall back to the key's default digest. PQC signatures (ML-DSA, SLH-DSA) have an intrinsic digest and may be NID_undef. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* irmd: Specify peer authentication contractDimitri Staessens2026-06-291-5/+268
| | | | | | | | | | | | | | | | | | | | | | OAP accepted requests and responses without a certificate even when the peer was expected to authenticate. An on-path attacker could strip the certificate and signature from a flow allocation response and substitute its own key exchange, silently downgrading the handshake to unauthenticated. Add an auth=required|optional policy to enc.conf, enforced per role: a client config requires the server to present a valid certificate, a server config requires the same from the client. Default is required for client side (https), optional server side. The client side default can be changed via OAP_CLIENT_AUTH_DEFAULT for testing. Replace the bare 'none' keyword with encryption=none, which disables encryption only: the digest and the authentication policy are kept, so authenticated but unencrypted flows can be configured. Configs using bare 'none' are now rejected. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Add generic hierarchical timing wheelDimitri Staessens2026-05-202-0/+664
| | | | | | | | | Introduce a generic 3-level / 256-slot deadline-ordered callback queue (1 ms / 16 ms / 256 ms per-slot resolution at levels 0/1/2). Will replace the existing timerwheel.c. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Use tpm.h for TPM testDimitri Staessens2026-05-201-1/+1
| | | | | | | | The threadpool manager (TPM) test unnecessarily included the source instead of the header. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Move CRC implementations to a subfolderDimitri Staessens2026-05-065-336/+0
| | | | | Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Add CRC-8 and CRC-16 checksumsDimitri Staessens2026-05-064-0/+208
| | | | | | | These checksum will be handy for header checksums. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Add CRC-64/NVMe checksumDimitri Staessens2026-05-063-0/+165
| | | | | | | | | | | | | | | | | Add CRC-64/NVMe implementation with compile-time hardware backend selection: x86 PCLMUL+SSE4.1 fold-by-16 (HAVE_PCLMUL) aarch64 PMULL fold-by-16 when (HAVE_PMULL) and a byte-table fallback. It's added as HASH_CRC64 to enum hash_algo (in the internal-use-only section after HASH_MD5). Both mem_hash() and hash_len() early-return for HASH_CRC64 because libgcrypt has no CRC-64/NVMe. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Fix certificate DER encoding and key buffersDimitri Staessens2026-03-142-16/+16
| | | | | | | | | | | i2d_X509() allocated buf->data via OPENSSL_malloc(), but callers free it with freebuf() which uses free(). Fix by allocating with malloc() and encoding directly into the buffer. Also replaces MSGBUFSZ with CRYPT_KEY_BUFSZ (4096) for key material buffers and removes leftover debug logging. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Add tests for missing root CADimitri Staessens2026-03-141-0/+55
| | | | | | | | | This adds authentication tests to verify flows are rejected with a missing root CA certificate in the store. Also adds one for the OAP protocol. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Update copyright to 2026Dimitri Staessens2026-02-1812-12/+12
| | | | | Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Add SLH-DSA tests and per-algorithm PQC gatingDimitri Staessens2026-02-186-14/+382
| | | | | | | | | | | | | | | | | This replaces the single HAVE_OPENSSL_PQC/DISABLE_PQC with per-algorithm CMake variables (ML-KEM, ML-DSA, SLH-DSA), gated by the OpenSSL versions: ML-KEM and ML-DSA require >= 3.4, SLH-DSA >= 3.5. SLH-DSA was already working, but now added explicit authentication tests for it with a full certificate chain (root CA, intermediate CA, server) to show full support. Rename PQC test files and cert headers to use algorithm-specific names (ml_kem, ml_dsa, slh_dsa) and move cert headers to include/test/certs/. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Refactor CMake back to in-tree CMakeListsDimitri Staessens2026-02-131-17/+1
| | | | | | | | | | | | | | | | | | | | | | This moves the build definitions back to src/ subdirectories (CMakeLists.txt per component). Configuration and dependencies are kept out of tree. Configuration options are bundled into cmake/config/ modules. Dependencies are grouped by component (system/, crypt/, eth/, coverage/, etc.). It now consistently uses target-based commands (target_include_directories, target_link_libraries) instead of global include_directories(). Proper PRIVATE/PUBLIC visibility for executable link libraries. CONFIG_OUROBOROS_DEBUG now properly set based on being a valid debug config (not just checking the string name). It also adds OuroborosTargets export for find_package() support and CMake package config files (OuroborosConfig.cmake) for easier integration with CMake projects. The build logic now follows more idiomatic CMake practices with configuration separated from target definitions. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Fix OpenSSL includes and explicit_bzero on OSXDimitri Staessens2026-02-131-1/+1
| | | | | | | | | | | | | | | | | The include headers and NIDs are different on macOS X. It also doesn't have explicit_bzero. The crypt.h includes are now guarded to work on OS X (trying to avoid the includes by defining the OpenSSL mac header guard led to a whole list of other issues). The explicit zero'ing of buffers temporarily holding secrets has now been abstracted in a crypt_secure_clear() function defaulting to OpenSSL_cleanse, explicit_bzero (if present) or a best-effort option using a volatile pointer. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Fix crypt test and secure memory initializationDimitri Staessens2026-01-301-2/+7
| | | | | | | | | The crypt_test had a HAVE_OPENSSL guard missing and was trying to execute tests that required OpenSSL without it being installed. The SECMEM values need to be set by CMake without OpenSSL installed. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Replace rdrbuff with a proper slab allocatorDimitri Staessens2026-01-263-114/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a first step towards the Secure Shared Memory (SSM) infrastructure for Ouroboros, which will allow proper resource separation for non-privileged processes. This replaces the rdrbuff (random-deletion ring buffer) PoC allocator with a sharded slab allocator for the packet buffer pool to avoid the head-of-line blocking behaviour of the rdrb and reduce lock contention in multi-process scenarios. Each size class contains multiple independent shards, allowing parallel allocations without blocking. - Configurable shard count per size class (default: 4, set via SSM_POOL_SHARDS in CMake). The configured number of blocks are spread over the number of shards. As an example: SSM_POOL_512_BLOCKS = 768 blocks total These 768 blocks are shared among 4 shards (not 768 × 4 = 3072 blocks) - Lazy block distribution: all blocks initially reside in shard 0 and naturally migrate to process-local shards upon first allocation and subsequent free operations - Fallback with work stealing: processes attempt allocation from their local shard (pid % SSM_POOL_SHARDS) first, then steal from other shards if local is exhausted, eliminating fragmentation while maintaining low contention - Round-robin condvar signaling: blocking allocations cycle through all shard condition variables to ensure fairness - Blocks freed to allocator's shard: uses allocator_pid to determine target shard, enabling natural load balancing as process allocation patterns stabilize over time Maintains existing robust mutex semantics including EOWNERDEAD handling for dead process recovery. Internal structures exposed in ssm.h for testing purposes. Adds some tests (pool_test, pool_sharding_test.c. etc) verifying lazy distribution, migration, fallback stealing, and multiprocess behavior. Updates the ring buffer (rbuff) to use relaxed/acquire/release ordering on atomic indices. The ring buffer requires the (robust) mutex to ensure cross-structure synchronization between pool buffer writes and ring buffer index publication. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Speed up key rotation testsDimitri Staessens2026-01-262-11/+14
| | | | | | | | | | The tests were not correct as the library was compiled with the default 1 << 20 epoch. Added a parametere to the sk configuration that specifies the epoch size. Set to 1 << KEY_ROTATION_BIT in dev.c, but lowered to 7 in unit tests. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Fix authentication testDimitri Staessens2026-01-261-98/+0
| | | | | | | | The hardcoded certificates were re-introduced in ea52d5275, breaking the build. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Add automatic key rotation for encryptionDimitri Staessens2026-01-232-0/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | Implement forward-secret key rotation using HKDF key derivation. The operation is based on QUIC RFC 9001 and wireguard. Keys rotate every 2^KEY_ROTATION_BIT packets, with the current phase (P) signaled via controlling a bit in the IV (bit 7, first bit on the wire). Default 20 (1M packets). The wire format, after the DT header is: [ P | random IV ][ encrypted blob ][ AEAD tag ] Works with and without retransmission, and the FRCT header is fully contained in the encrypted blob if used. The receiver detects phase changes and rotates accordingly, keeping the previous key valid during a grace period. This handles packet reordering in unreliable flows: the 3/4 period protection window prevents premature rotation when late packets arrive, while the 1/2 period grace window ensures the old key remains available for decryption. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Fix getting text certificatesDimitri Staessens2026-01-231-1/+100
| | | | | | | | | | | | | | | The openssl_crt_str function was using BIO_get_mem_data() but this is not guaranteed to be NULL-terminated, causing buffer overruns. This was the root cause of ASan tests with certificates running for minutes and eventually getting killed on the CI/CD pipeline: Start 1: lib/auth_test 1/26 Test #1: lib/auth_test ......................***Skipped 312.75 sec Start 16: irmd/oap/oap_test 16/26 Test #16: irmd/oap/oap_test ..................***Skipped 345.87 sec Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Add post-quantum cryptography supportDimitri Staessens2026-01-1910-258/+1932
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds initial support for runtime-configurable encryption and post-quantum Key Encapsulation Mechanisms (KEMs) and authentication (ML-DSA). Supported key exchange algorithms: ECDH: prime256v1, secp384r1, secp521r1, X25519, X448 Finite Field DH: ffdhe2048, ffdhe3072, ffdhe4096 ML-KEM (FIPS 203): ML-KEM-512, ML-KEM-768, ML-KEM-1024 Hybrid KEMs: X25519MLKEM768, X448MLKEM1024 Supported ciphers: AEAD: aes-128-gcm, aes-192-gcm, aes-256-gcm, chacha20-poly1305 CTR: aes-128-ctr, aes-192-ctr, aes-256-ctr Supported HKDFs: sha256, sha384, sha512, sha3-256, sha3-384, sha3-512, blake2b512, blake2s256 Supported Digests for DSA: sha256, sha384, sha512, sha3-256, sha3-384, sha3-512, blake2b512, blake2s256 PQC support requires OpenSSL 3.4.0+ and is detected automatically via CMake. A DISABLE_PQC option allows building without PQC even when available. KEMs differ from traditional DH in that they require asymmetric roles: one party encapsulates to the other's public key. This creates a coordination problem during simultaneous reconnection attempts. The kem_mode configuration parameter resolves this by pre-assigning roles: kem_mode=server # Server encapsulates (1-RTT, full forward secrecy) kem_mode=client # Client encapsulates (0-RTT, cached server key) The enc.conf file format supports: kex=<algorithm> # Key exchange algorithm cipher=<algorithm> # Symmetric cipher kdf=<KDF> # Key derivation function digest=<digest> # Digest for DSA kem_mode=<mode> # Server (default) or client none # Disable encryption The OAP protocol is extended to negotiate algorithms and exchange KEX data. All KEX messages are signed using existing authentication infrastructure for integrity and replay protection. Tests are split into base and _pqc variants to handle conditional PQC compilation (kex_test.c/kex_test_pqc.c, oap_test.c/oap_test_pqc.c). Bumped minimum required OpenSSL version for encryption to 3.0 (required for HKDF API). 1.1.1 is long time EOL. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Add option to toggle Ouroboros logging in testsDimitri Staessens2026-01-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The test output is a bit polluted with logs originating fomr the logging system, e.g.: 23: test_bind_prog started. 23: ==16636== reg/name(DB): Add prog reg_test to name testname. 23: ==16636== reg(EE): Removing from names. 23: test_bind_prog succeeded. This adds a flag DISABLE_TEST_LOGGING that suppresses log_* output in tests to keep them clean: 23: test_bind_prog started. 23: test_bind_prog succeeded. The status is printed in CMake output: -- Ouroboros logging in test output disabled -- Ouroboros logging in test output enabled By default the flag is ON (clean test output). Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Refactor CMake modulesDimitri Staessens2026-01-071-1/+1
| | | | | | | | | This moves the CMake build logic out of the source tree and splits it up into a more modular form. The tests now have a CMakeLists.txt file in their respective source directory. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Add build_tests targetThijs Paelman2025-11-211-1/+1
| | | | | | | | | This intermediate target only builds all the tests, it doesn't run them. It is added for clarifying the different steps involved in testing. The 'check' target still builds AND runs the tests as before. Signed-off-by: Thijs Paelman <thijs@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Fix buffer in auth_test and tpm logDimitri Staessens2025-11-211-1/+2
| | | | | | | | | The string buffer in auth_test was one byte too short. The log line for the thread id in the tpm thread debug output needs type conversion. The build fails because of this on OS X. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Include tests in 'all' targetThijs Paelman2025-11-071-1/+1
| | | | | | | | | | | | When BUILD_TESTING=ON, then the default 'all' target will now build also the tests. This behaviour could be controlled by an extra variable (see https://stackoverflow.com/a/42235335), but this increases complexity without many benefits. Signed-off-by: Thijs Paelman <thijs@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Move encryption control from QoS to nameDimitri Staessens2025-09-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the flow encryption option (cypher_s) from the qosspec. The configuration file is configured in the security options (default /etc/ouroboros/security/). For this poc, encryption can be disabled client or server side by putting an enc.cfg file. If that file is present in the client folder, the client will require encryption. If that file is present on the server side, the server will require encryption and reject non-encrypted flows. Encryption is now configured outside of any application control. Example: /etc/ouroboros/security/client/oping/enc.cfg exists: irmd(II): Encryption enabled for oping. irmd(DB): File /etc/ouroboros/security/client/oping/crt.pem does not exist. irmd(II): No security info for oping. irmd(DB): Generated ephemeral keys for 87474. irmd/oap(PP): OAP_HDR [caf203681d997941 @ 2025-09-02 17:08:05 (UTC) ] --> irmd/oap(PP): Certificate: <none> irmd/oap(PP): Ephemeral Public Key: [91 bytes] irmd/oap(PP): Data: <none> irmd/oap(PP): Signature: <none> Example: /etc/ouroboros/security/client/oping/enc.cfg does not exist: irmd(II): Allocating flow for 87506 to oping. irmd(DB): File /etc/ouroboros/security/client/oping/enc.cfg does not exist. irmd(DB): File /etc/ouroboros/security/client/oping/crt.pem does not exist. irmd(II): No security info for oping. irmd/oap(PP): OAP_HDR [e84bb9d7c3d9c002 @ 2025-09-02 17:08:30 (UTC) ] --> irmd/oap(PP): Certificate: <none> irmd/oap(PP): Ephemeral Public Key: <none> irmd/oap(PP): Data: <none> irmd/oap(PP): Signature: <none> Example: /etc/ouroboros/security/server/oping/enc.cfg exists: irmd(II): Flow request arrived for oping. irmd(DB): IPCP 88112 accepting flow 7 for oping. irmd(II): Encryption enabled for oping. irmd(DB): File /etc/ouroboros/security/server/oping/crt.pem does not exist. irmd(II): No security info for oping. irmd/oap(PP): OAP_HDR [3c717b3f31dff8df @ 2025-09-02 17:13:06 (UTC) ] <-- irmd/oap(PP): Certificate: <none> irmd/oap(PP): Ephemeral Public Key: <none> irmd/oap(PP): Data: <none> irmd/oap(PP): Signature: <none> irmd(WW): Encryption required but no key provided. The server side will pass the ECRYPT to the client: $ oping -l Ouroboros ping server started. Failed to accept flow: -1008 $ oping -n oping -c 1 Failed to allocate flow: -1008. Encryption on flows can now be changed at runtime without needing to touch/reconfigure/restart the process. Note: The ECRYPT result is passed on via the flow allocator responses through the IPCP (discovered/fixed some endianness issues), but the reason for rejecting the flow can be considered N+1 information... We may move that information up into the OAP header at some point. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* irmd: Add flow authenticationDimitri Staessens2025-08-181-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds initial implementation of peer authentication as part of flow allocation. If credentials are not provided, this will be accepted and logged as info that the flow is not authenticated. Certificates and keys are passed as .pem files. The key file should not be encrypted, else the IRMd will open a prompt for the password. The default location for these .pem files is in /etc/ouroboros/security. It is strongly recommended to make this directory only accessible to root. ├── security │ ├── cacert │ │ └── ca.root.o7s.crt.pem │ ├── client │ │ ├── <name> │ │ | ├── crt.pem │ │ | └── key.pem │ │ └── <name> | | ├──... | | │ ├── server │ │ ├── <name> │ │ | ├── crt.pem │ │ | └── key.pem │ │ └── <name> | | ├── ... | | │ └── untrusted │ └── sign.root.o7s.crt.pem Trusted root CA certificates go in the /cacert directory, untrusted certificates for signature verification go in the /untrusted directory. The IRMd will load these certificates at boot. The IRMd will look for certificates in the /client and /server directories. For each name a subdirectory can be added and the credentials in that directory are used to sign the OAP header for flows at flow_alloc() on the client side and flow_accept() on the server side. These defaults can be changed at build time using the following variables (in alphabetical order): OUROBOROS_CA_CRT_DIR /etc/ouroboros/security/cacert OUROBOROS_CLI_CRT_DIR /etc/ouroboros/security/client OUROBOROS_SECURITY_DIR /etc/ouroboros/security OUROBOROS_SRV_CRT_DIR /etc/ouroboros/security/server OUROBOROS_UNTRUSTED_DIR /etc/ouroboros/security/untrusted The directories for the names can also be configured at IRMd boot using the configuraton file and at runtime when a name is created using the "irm name create" CLI tool. The user needs to have permissions to access the keyfile and certificate when specifying the paths with the "irm name create" CLI tool. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
* lib: Fix memory leaks in testsDimitri Staessens2025-08-152-0/+3
| | | | | | Fixes memory leaks in the tests that had escaped detection. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
* lib: Fix authentication test for older OpenSSLDimitri Staessens2025-08-111-19/+19
| | | | | | | | Signed the server certificate using SHA3 during last update, which is bugged on older versions of libssl. Using ecdsa-with-SHA256 again. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Fix authentication testDimitri Staessens2025-08-061-70/+67
| | | | | | | | The test had a root certificate that expired today. All test certificates updated, now valid until 2045. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* irmd: Initial Flow Allocation Protocol HeaderDimitri Staessens2025-07-232-95/+458
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the initial version for the flow allocation protocol header between IRMd instances. This is a step towards flow authentication. The header supports secure and authenticated flow allocation, supporting certificate-based authentication and ephemeral key exchange for end-to-end encryption. id: 128-bit identifier for the entity. timestamp: 64-bit timestamp (replay protection). certificate: Certificate for authentication. public key: ECDHE public key for key exchange. data: Application data. signature: Signature for integrity/authenticity. Authentication and encryption require OpenSSL to be installed. The IRMd compares the allocation request delay with the MPL of the Layer over which the flow allocation was sent. MPL is now reported by the Layer in ms instead of seconds. Time functions revised for consistency and adds some tests. The TPM can now print thread running times in Debug builds (TPM_DEBUG_REPORT_INTERVAL) and abort processes with hung threads (TPM_DEBUG_ABORT_TIMEOUT). Long running threads waiting for input should call tpm_wait_work() to avoid trigger a process abort. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Use ecdsa_with_SHA-256 signatures in auth_testDimitri Staessens2025-07-041-51/+50
| | | | | | | | Older versions of openssl don't seem to like certificates signed with ecdsa_with_SHA3-256. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Add authentication functionsDimitri Staessens2025-07-046-2/+1040
| | | | | | | | | | Adds functions needed for authentication using X509 certificates, implemented using OpenSSL. Refactors some library internals, and adds some unit tests for them. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Fix tests with CMake >= 3.29Dimitri Staessens2024-04-161-1/+5
| | | | | | | | | | | | | | | | | | Removing the testdriver source by the driver name doesn't work anymore in CMake 3.29 because of the following (breaking) change: Changed in version 3.29: The test driver source is listed by absolute path in the build tree. Previously it was listed only as <driverName>. https://cmake.org/cmake/help/latest/command/create_test_sourcelist.html When using CMake 3.29 or above, Ouroboros will use the list POP_FRONT function (introduced in CMake 3.15) to get rid of it. https://cmake.org/cmake/help/latest/command/list.html#pop-front Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib: Fix CRC32 hashing0.21.1Dimitri Staessens2024-02-191-14/+34
| | | | | | | | | I assumed that all hashes were stored in Big Endian, but apparently the CRC32 was still in machine endianness when calculated by the rhash implementation. Fixed and updated hash tests a bit. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-01 13:02:00 +0000