summaryrefslogtreecommitdiff
path: root/src/irmd/ipcp.c
Commit message (Collapse)AuthorAgeFilesLines
* lib: Complete retransmission logicDimitri Staessens2020-09-251-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | This completes the retransmission (automated repeat-request, ARQ) logic, sending (delayed) ACK messages when needed. On deallocation, flows will ACK try to retransmit any remaining unacknowledged messages (unless the FRCTFLINGER flag is turned off; this is on by default). Applications can safely shut down as soon as everything is ACK'd (i.e. the current Delta-t run is done). The activity timeout is now passed to the IPCP for it to sleep before completing deallocation (and releasing the flow_id). That should be moved to the IRMd in due time. The timerwheel is revised to be multi-level to reduce memory consumption. The resolution bumps by a factor of 1 << RXMQ_BUMP (16) and each level has RXMQ_SLOTS (1 << 8) slots. The lowest level has a resolution of (1 << RXMQ_RES) (20) ns, which is roughly a millisecond. Currently, 3 levels are defined, so the largest delay we can schedule at each level is: Level 0: 256ms Level 1: 4s Level 2: about a minute. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* lib, ipcpd: piggyback ECDHE on flow allocationDimitri Staessens2020-02-251-12/+24
| | | | | | | | | | | The initial implementation for the ECDHE key exchange was doing the key exchange after a flow was established. The public keys are now sent allowg on the flow allocation messages, so that an encrypted tunnel can be created within 1 RTT. The flow allocation steps had to be extended to pass the opaque data ('piggybacking'). Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Update copyright to 20200.16.0Dimitri Staessens2020-01-021-1/+1
| | | | | Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Refactor normal to unicastDimitri Staessens2019-07-291-2/+2
| | | | | | | | This completes the renaming of the normal IPCP to the unicast IPCP in the sources, to get everything consistent with the documentation. Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks> Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
* build: Update copyright to 2019Dimitri Staessens2019-02-051-1/+1
| | | | | | | Updates the copyright notice in all sources to 2019. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* include: Add a flow_join operation for broadcastDimitri Staessens2018-12-271-7/+31
| | | | | | | | | | | | This adds a new flow_join operaiton for broadcast, which is a much safer solution than overloading destination name semantics. The internal API now also has a different IPCP_FLOW_JOIN operation. The IRMd doesn't need to query broadcasts IPCPs for the name, it can just check if an IPCP with the layer name exists. The broadcast IPCP doesn't need to implement the query proxy call anymore. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Add broadcast IPCPDimitri Staessens2018-10-241-0/+3
| | | | | | | | | | This adds a broadcast IPCP that allows us to easily create multicast applications. The broadcast IPCP accepts flows for "<layer_name>.mc". A tool, obc (Ouroboros broadcast), is added that sends and reads a message to a broadcast layer. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* tools: Specify QoS cube for data transfer flows0.13.0Dimitri Staessens2018-10-191-4/+8
| | | | | | | | | The ipcp connect command can now set a specific qos cube for data transfer flows. For management flows, the tool ignores this and defaults to raw until data flows are stable enough. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Rename port_id to flow_idDimitri Staessens2018-10-051-9/+9
| | | | | | | Renames port_id to flow_id according to updated nomenclature. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Pass qosspec at flow allocationDimitri Staessens2018-10-051-6/+7
| | | | | | | | | | | | The flow allocator now passes the full qos specification to the endpoint, instead of just a cube. This is a more flexible architecture, as it makes QoS cubes internal to the layers. Adds endianness transforms for the flow allocator protocol in the normal IPCP. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib: Make UNIX socket buffer size configurable0.11.3Sander Vrijders2018-05-031-2/+2
| | | | | | | | | | This makes the buffer size used by the UNIX sockets configurable. In case of a lot of IPCPs in the system it might become too small with the default value, resulting in irm command failures. The user can now easily configure it with an adequate value. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* lib: Simplify reg/unreg APIDimitri Staessens2018-03-221-12/+12
| | | | | | | | | | | | | | | | | | | | The reg/unreg API is simplified to registering and unregistering a single name with a single IPCP. The functionality associated with registering names was moved from the IRMd to the irm tool. The function to list IPCPs was simplified to return all IPCPs in the system with their basic properties needed for management. The above changes led to some needed changes in the irm tool and the management functions that were depending on the previous behaviour of list_ipcps. Command line functionality to list IPCPs in the system is also added to the irm tool. Some older code was refactored. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Add IPCP over DIX EthernetDimitri Staessens2018-03-101-0/+3
| | | | | | | | | | | | | | | | | | This adds an IPC Process that uses DIX Ethernet with an Ethertype that is configurable at bootstrap. This allows parallel DIX layers over the same Ethernet network with different Ethertypes (and one LLC layer). It allows jumbo frames in the future, and should avoid the problems we have with some routers not handling LLC traffic very well. The destination endpoint ID is sent as a 16 bit integer, so the maximum payload is 1498 bytes in standard Ethernet, and 8998 bytes when Jumbo frames are used. The implementation is very similar to the Ethernet LLC IPCP, so it is implemented using preprocessor macros in the single source instead of duplicating code. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* irmd: Replace fork and execv with posix_spawnSander Vrijders2018-02-231-13/+6
| | | | | | | | | This replaces the fork and execv calls with posix_spawn since it is supported on more platforms, and is more efficient. Also fixes some bad indentation. Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be> Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be>
* ipcpd: Revise Data Transfer component0.10.0Dimitri Staessens2018-02-131-10/+10
| | | | | | | | | | | This makes the TTL non-optional and allows the maximum (initial) value of the TTL to be specified at bootstrap (the default is set to 60). The fd in the DT PCI is now called EID (Endpoint ID). The names "dif" and "ae" have been replaced by "layer" and "component" respectively in all sources. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* include, src: Update copyright to 2018Dimitri Staessens2018-01-091-1/+1
| | | | | | | Happy New Year, Ouroboros. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Use the term "layer" and deprecate "shim"Dimitri Staessens2017-12-191-4/+4
| | | | | | | | | | | | | | This changes the terminology to use layer instead of DIF and deprecate the word "shim" for the IPCPs that attach to Ethernet LLC and UDP .The terminology has not yet been changed in the variable names etc. This reflects the design choices in Ouroboros to make IPCPs pure resource allocators instead of also providing an "IPC service". The Ouroboros IPCPs that attach to Ethernet and UDP implement the allocator and are thus not really shims. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* ipcpd: Integrate raptor into ouroboros 0.8Dimitri Staessens2017-12-151-0/+3
| | | | | | | | | | | The raptor code is refactored to completely remove reduntant code relating to addresses. The dependency on the google protocol buffers is removed. The build system will only build raptor if the relevant kernel module is found on the system. The irm tool and the relevant documentation are updated. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* lib, tools: Rename application process and instanceDimitri Staessens2017-12-021-53/+53
| | | | | | | | | | | This refactors ouroboros to use "program" instead of "application process" and "process" instead of "application process instance" to align with current naming in current Operating Systems courses instead of the ISO nomenclature adopted by RINA. This change permeates through the entire implementation. Also contains some minor other refactors. Signed-off-by: Dimitri Staessens <dimitri.staessens@ugent.be> Signed-off-by: Sander Vrijders <sander.vrijders@ugent.be>
* irmd: Add specific timeout for IPCP connectSander Vrijders2017-08-301-0/+4
| | | | | | This adds a specific timeout for IPCP connect, since it may take a lot longer than the regular socket timeout due to flow allocations in the IPCP.
* irmd: Remove temporary debugging logsdimitri staessens2017-08-291-4/+1
|
* tools: Add tool to connect IPCP componentsdimitri staessens2017-08-281-0/+61
| | | | | | | | | | | | This enables user-written tools to instruct IPCPs to establish and tear down connections (a.k.a. adjacencies) between its internal components (Management and Data Transfer). For more info, do "irm ipcp connect" or "irm ipcp disconnect" on the command line. This commit exposes a deletion bug in the RIB where FSO's fail to unpack/parse. This will be fixed when the RIB is deprecated.
* lib, irmd: Use static buffer for messagesdimitri staessens2017-08-221-17/+9
|
* build: Revise the build systemdimitri staessens2017-08-211-1/+4
| | | | | | | | | | This revises the build system to have configuration per system component. System settings can now be set using cmake. The standard compliance defines were removed from configuration header and are set in the sources where needed. Also some small code refactors, such as moving the data for shims out of the ipcp structure to the respective shims were performed.
* irmd: Handle IPCP creation fails gracefullydimitri staessens2017-08-171-29/+24
|
* build: Replace fsf snail mail with contact URLdimitri staessens2017-08-131-1/+1
|
* build, lib, ipcpd, irmd: Add support for libgcryptdimitri staessens2017-08-091-3/+17
| | | | | | | | | | | | | | | | This adds support for libgcrypt. If at least version 1.7.0 of libgcrypt is present, it may be used for secure random number generation and is used for hashing in the irmd/ipcp. The hash definitions are moved to the internal hash.h header, and defined independently of the hashes that are defined as part of the directory policy for the normal IPCP. The translation is moved from the IRMd to ipcpd/ipcp.h. The bootstrap call from the IRMd expects the IPCP to return the correct hash algorithm with a dif_info struct, which is in line with the behavior of the enroll call. This also improves how some platform checks in the build system are handled.
* irmd: Specify timeout per commandDimitri Staessens2017-08-051-22/+44
| | | | | | | The commands towards the IPCPs have different time requirements, but the irmd had only a single timeout value to wait for a response. This commit allows setting different timeouts for the IRMd based on the command, configurable globally.
* ipcpd: Allow specifying fixed syntaxdimitri staessens2017-05-151-3/+3
| | | | | | This commits adds the functions and messages to specify a fixed protocol syntax during CACEP. It also revises the messages for specifying the DT protocol syntax from the irm tool.
* ipcpd: Add capability reportingdimitri staessens2017-04-271-6/+20
| | | | | | | | The IPCP will now report the DIF name and the hash value to the IRMd as a dif_info struct. This can later be extended to add further capability reporting. Some bugfixes in normal. Fixes #24
* ipcpd: Allow specifying the hash algorithm to usedimitri staessens2017-04-161-0/+1
| | | | Currently CRC32, MD5, and SHA3 (224, 256, 384 and 512 bit) are supported.
* lib, ipcpd, irmd: Register hash instead of namedimitri staessens2017-04-131-53/+60
| | | | | | | | | All information passed over the IRMd/IPCP boundary for using IPC services (flow allocation, registration) is now hashed. This effectively fixes the shared namespace between DIFs and the IRMDs. This PR also fixes some API issues (adding const identifiers), shuffles the include headers a bit and some small bugs.
* lib, irmd: Implement flow allocation timeoutdimitri staessens2017-04-061-6/+8
| | | | | | Setting the timeouts on flow_alloc and flow_accept will now work. This makes some changes to the UNIX sockets used for management communication between the APs, IRMd and IPCPs.
* lib: Revise flow allocation APIdimitri staessens2017-03-311-7/+0
| | | | | | The flow_alloc_res and flow_alloc_resp calls have been removed. The flow_alloc and flow_accept calls are now both blocking and take an additional timeout argument.
* Change email addresses to ugent.beSander Vrijders2017-03-031-1/+2
| | | | | | | Our mailserver was migrated from intec.ugent.be to the central ugent.be emailserver. This PR updates the header files to reflect this change as well. Some header files were also homogenized if the parameters within the functions were badly aligned.
* lib: Remove application entity nameSander Vrijders2017-02-241-3/+1
| | | | | The AE name should not be passed over the layer boundaries. If an application has more than one AE it should exchange this in CACEP.
* lib: Log to the logging systemdimitri staessens2017-02-081-20/+19
| | | | | | | | | | This removes the logfile and outputs log messages to the logging system. The creation of the logfiles (as well as the ap_init() call) were moved into ipcp_init() to simplify the IPCP creation and shutdown. Fixes #25 Fixes #27
* ipcpd: Let IPCPs bind a nameSander Vrijders2017-01-091-7/+7
| | | | | | | This allows IPCPs to bind a name, so that they can announce their name to neighbors which can then allocate a flow to them. Registering of the name happens by an administrator. It also moves the irmd_api to common ground, since it is used by all IPCPs.
* lib, ipcpd, irmd: Proof of concept QoSdimitri staessens2017-01-031-3/+3
| | | | | | | | | | Now correctly relays the qoscube end-to-end in the stack. A simple function specifying the cube in the spec is used for initial testing. The translation is now done in dev.c, but it could be moved elsewhere when qos cabability matures and the need arises.
* ouroboros: Correct license statementsdimitri staessens2016-12-241-3/+2
| | | | | This corrects the license statements on all files. Installed headers are LGPLv2.1, the rest of the code is GPLv2.
* ipcpd, lib, irmd: Update to use qoscube_tdimitri staessens2016-12-241-6/+6
|
* lib, irmd, ipcpd: Add name querying to IPCPsSander Vrijders2016-10-261-4/+28
| | | | | | | | | This adds the ability to query IPCPs if a name can be reached through them, e.g. if a name is available in a DIF. This means that in the shim-udp a DNS query is performed, in the shim-eth-llc an ARP-like query has been added, in the local a check is done to see if the name is registered, and in the normal currently no application is reachable through it.
* lib: Demultiplex the fast pathdimitri staessens2016-10-211-7/+6
| | | | | | | | The fast path will now use an incoming ring buffer per flow per process. This necessitated the development of a new method for the asynchronous io call, which is now based on an event queue system for scalability (fqueue). The ipcpd's and tools have been updated to this API.
* lib, ipcp: Revise fast path and flow interfacesdimitri staessens2016-10-041-0/+402
IPCPs can now use ap_init() to initialize the memory. All flows are accessed using flow descriptors, this greatly simplifies IPCP development. Reverts the fast path to a single ap_rbuff per process. Splits lib/ipcp into irmd/ipcp and lib/ipcp-dev. Adds a lib/shim-dev holding tailored functions for shims. Moves the buffer_t to utils.h. Fixes the shim-eth-llc length field. Removes the flow from shared.h. Fixes #4 Fixes #5
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 06:27:39 +0000