| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
| |
The ipcp-ops header was removed and merged into ipcp.h. The common
components dif_name and ipcp_type have been moved to the main ipcp
struct. After this move, ipcp_data only contained shim information, so
it was renamed to shim_data. The ipcp_init() function checks the type
and will only include the shim_data if the type is not an IPCP_NORMAL.
All ipcps have been adapted to this change in API.
|
| |
|
|
|
|
|
|
|
|
| |
This PR updates the normal IPCP to use the new RIB. The old ribmgr is
removed and replaced by a stub that needs to be implemented. All
components (dir, fmgr, frct) were adapted to the new RIB API. A lot
of functionality was moved outside of the ribmgr, such as the
addr_auth, which is now a component of the IPCP. The address is also
stored to the ipcpi struct. The irm tool has an option to set the gam
policy of the rib manager.
|
| |
|
|
|
|
|
| |
This allows IPCPs to bind a name, so that they can announce their name
to neighbors which can then allocate a flow to them. Registering of
the name happens by an administrator. It also moves the irmd_api to
common ground, since it is used by all IPCPs.
|
| |
|
|
|
|
|
| |
These operations separe the starting and joining of the main ipcp
threads into ipcp_boot() and ipcp_shutdown() operations. This allows
the proper cleanup of user data and user threads after the IPCP is
requested to shut down.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reorganizes the normal IPCP a bit to make sure internal components do
not need to access the state of the IPCP. The IPCP has now a thread
calling accept and delegating it to the correct component based on the
AE name (this used to be in the fmgr).
Internal components are initialized upon enrollment or bootstrap of
the IPCP. If a step fails, the IPCP goes back to the INIT state, if
all components boot correctly, it goes to the operational state.
RIB synchronization is still done by sending a CDAP start/stop and
syncing with a ribmgr state, but needs revision later on.
|
| |
|
|
|
|
| |
Since the mainloop threadpool is created on ipcp_init and all threads
waited for on ipcp_fini, there is no need for it to be accessible from
elsewhere.
|
| |
|
|
|
| |
This corrects the license statements on all files. Installed headers
are LGPLv2.1, the rest of the code is GPLv2.
|
| |
|
|
| |
Changes a state of the IPCP to a more correct terminology.
|
| |
|
|
|
|
|
|
| |
This will split the IPCP state PENDING_ENROL into IPCP_CONFIG and
IPCP_BOOTING. IPCP_CONFIG is concerned only with configuring the IPCP
with the bare essence. When in IPCP_BOOTING, the IPCP will complete
its configuration by starting its policies, and thus making the IPCP
completely functioning.
|
| |
|
|
|
|
|
| |
This adds a threadpool for the main loop of the IPCPs. Before there
was a single thread handling each request, which could result in
starvation since performing name queries at the same time as enrolling
a normal IPCP was impossible.
|
| |
|
|
|
| |
This has the code checked with -Wcast-qual and -Wconversion flags.
These flags were removed because SWIG generated code fails.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
IPCPs can now use ap_init() to initialize the memory. All flows are
accessed using flow descriptors, this greatly simplifies IPCP
development. Reverts the fast path to a single ap_rbuff per process.
Splits lib/ipcp into irmd/ipcp and lib/ipcp-dev. Adds a lib/shim-dev
holding tailored functions for shims. Moves the buffer_t to utils.h.
Fixes the shim-eth-llc length field. Removes the flow from shared.h.
Fixes #4
Fixes #5
|
| |
|
|
|
|
| |
The state lock was reverted to an rwlock to avoid interference of
management functions with the fast path. IPCPs now close without
calling unsafe functions in the signal handler.
|
| |
|
|
|
|
|
| |
This adds a condition variable to the IPCP state, so that upon state
changes any listeners to state changes can be notified. It also
replaces the read/write lock with a mutex in order to be able to do
so.
|
| |
|
|
|
|
|
| |
This will add more functionality for enrolling two normal IPCPs with
each other. Some bugs were fixed in CDAP. Now on enrolling, an IPCP
will send a START message to the other IPCP. Next step is syncing the
RIBs.
|
| |
|
|
|
|
|
|
|
|
| |
Writing output to log files is now enabled by default. Logs are
written to <INSTALL_PREFIX>/var/log/ouroboros, which is created on
install. There is a log file for the irmd and one per IPCP. To still
get (colored) output on stdout, provide the --stdout switch when
starting the irmd.
Fixes #17
|
| |
|
|
|
|
|
|
| |
This commit introduces a first version of the revised CDAP
specification. CACEP (for authentication purposes) has been separated
from CDAP. Application developers may use CDAP if they find it
useful. Within Ouroboros CDAP will be used to perform operations on
the RIB of an IPCP.
|
| |
|
|
|
|
|
|
| |
Update to POSIX 200112L to allow use of robust mutexes in the
shm_du_map. Removed the implementation of the rw_lock in favor of
pthread_rwlock_t.
Placeholder for the shm_du_map_sanitize function.
|
| |
|
|
|
| |
This adds a shim over LLC over Ethernet. It uses the raw socket API to
send messages directly over an interface.
|
| |
|
|
|
|
|
|
|
|
| |
Simplified locking to take only two locks: the first lock guards the
state of the ipcp. This lock must be held for writing on bootstrap and
closing, and held for reading during all other operations. The second
lock guards operations on flows, and must be held for writing during
allocation and deallocation, and held for reading when sending sdu's.
After adding a fd to FD_SET, the shim will wait for 1 ms to ensure
that the FD is added to the select call.
|
| |
|
|
|
|
|
| |
Added necessary locks for the shim-udp. This PR also improves thread
management, the main thread now starts a mainloop thread, which spawns
sdu handler threads when it the IPCP is enrolled. If the IPCP exits
the enrolled state, the sdu loop is cancelled.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit has a first implementation of flow allocation (the "slow
path") and read/write (the "fast path") for ouroboros. It provides
basic but unstable communications over the shared memory.
It required a lot of changes all over the stack, and fixes a number of
previously undetected issues.
This PR still need heavy revision regarding data model, locking and
cleanup.
lib/dev: modifications to the API. It now uses an ap_init() call to
set the AP name and sets the Instance ID to the pid of the process. It
also binds the AP to the shared memory and creates tables for mappings
in the fast path. A call to ap_fini() releases the resources.
lib/shm_ap_rbuff: added ring buffer for data exchange between
processes in the fast path. It passes an index in the shm_du_map.
lib/shm_du_map: rewrote API to work with calls from dev.c. Garbage
collector added. Tests updated to new API.
ipcpd/ipcp-data: removed everything related to flows, as these are
universal for all ap's and kept in ap_data (dev.c), or similar structs
for shim ipcps.
shim-udp: added flow allocator and read/write functions and shm
elements.
irmd: revised data model and structures necessary for flow allocation.
tools: echo updated to new dev.h API.
messaging system was updated to comply with new flow allocation
messages. All exchanges use pid and port_id to bootstrap the fast
path.
|
| |
|
|
|
| |
flow allocation now propagates on the client side up to the IPCP.
added UNKNOWN_AP and UNKNOWN_AE definitions to dev.h
|
| |
|
|
| |
fixes comments on 38c4169 (memleaks)
|
| |
|
|
|
| |
added missing NULL checks
common argument check function for ipcps
|
|
|
Basic functions for implementation of IPC processes, and
implementation of core functions of the shim IPCP over UDP. Updates
to the build system to compile these IPC processes, as well as some
fixes in the irmd (rudimentary capturing exit signals) and some fixes
in the library, mainly relating to the messaging.
Basic implementation of creation / bootstrapping / deletion of the
shim UDP. Placeholders for other functions.
|
