ipcpd: Revise UDP IPCP

The UDP IPCP now uses a fixed server UDP port (default 3435) for all
communications. This allows passing firewalls more easily since only a
single port needs to be opened. The client port can be fixed as well
if needed (default random). It uses an internal eid, so the MTU of the
UDP layer is reduced by 4 bytes, similar to the Ethernet IPCPs.

Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>

1 files changed, 12 insertions, 0 deletions

diff --git a/doc/man/ouroboros.8 b/doc/man/ouroboros.8
index 9c622639..618418c2 100644
--- a/doc/man/ouroboros.8
+++ b/doc/man/ouroboros.8
@@ -209,6 +209,18 @@ ip \fIip\fR specifies the local IP address to bind to
 .PP
 [dns \fdns\fR] specifies an optional DDNS server that will be used for
 the directory.
+.PP
+[cport \fcport\fR] specifies a client UDP port that will be used for
+sending packets.
+.br
+default: A random UDP port in the ephemeral range
+.PP
+[sport \fsport\fR] specifies a server UDP port that is used for
+receiving ouroboros traffic. This must be the same for the entire UDP
+layer. Parallel UDP layers should use different ports. This UDP port
+needs to be forwarded if the server is behind a NAT.
+.br
+default: 3435
 .RE
 
 .PP