Compilation options
Below is a list of the compile-time configuration options for Ouroboros. These can be set using
$ cmake -D<option>=<value> ..or using
ccmake .Options will only show up in ccmake if they are relevant for your system configuration. The default value for each option is underlined. Boolean values will print as ON/OFF in ccmake instead of True/False.
| Option | Description | Values |
|---|---|---|
| Compilation options | ||
| CMAKE_BUILD_TYPE | Set the build type for Ouroboros. Debug builds will add some extra logging. The debug build can further enable the address sanitizer (ASan) thread sanitizer (TSan) and leak sanitizer (LSan) options. | Release, Debug, DebugASan, DebugTSan, DebugLSan |
| CMAKE_INSTALL_PREFIX | Set a path prefix in order to install Ouroboros in a sandboxed environment. Default is a system-wide install. | <path> |
| DISABLE_SWIG | Disable SWIG support. | True, False |
| Library options | ||
| DISABLE_FUSE | Disable FUSE support, removing the virtual filesystem under <FUSE_PREFIX>. | True, False |
| FUSE_PREFIX | Set the path where the fuse system should be mounted. Default is /tmp/ouroboros. | <path> |
| DISABLE_LIBGCRYPT | Disable support for using the libgcrypt library for cryptographically secure random number generation and hashing. | True, False |
| DISABLE_OPENSSL | Disable support for the libssl library for cryptographic random number generation and hashing. | True, False |
| DISABLE_ROBUST_MUTEXES | Disable robust mutex support. Without robust mutex support, Ouroboros may lock up if processes are killed using SIGKILL. | True, False |
| PTHREAD_COND_CLOCK | Set the clock type to use for timeouts for pthread condition variables. Default on Linux/FreeBSD: CLOCK_MONOTONIC. Default on OS X: CLOCK_REALTIME. | <clock_id_t> |
| Shared memory system options | ||
| SHM_PREFIX | Set a prefix for the shared memory filenames. The mandatory leading slash is added by the build system. Default is "ouroboros". | <size_t> |
| SHM_BUFFER_SIZE | Set the maximum total number of packet blocks Ouroboros can buffer at any point in time. Must be a power of 2. | <size_t> |
| SHM_RDRB_BLOCK_SIZE | Set the size of a packet block. Default: page size of the system. | <size_t> |
| SHM_RDRB_MULTI-BLOCK | Allow packets that are larger than a single packet block. | True, False |
| DU_BUFF_HEADSPACE | Set the amount of space to allow for the addition of protocol headers when a new packet buffer is passed to the system. Default: 128 bytes. | <size_t> |
| DU_BUFF_TAILSPACE | Set the amount of space to allow for the addition of protocol tail information (CRCs) when a new packet buffer is passed to the system. Default: 32 bytes. | <size_t> |
| IRMd options | ||
| SYS_MAX_FLOWS | The maximum number of flows this Ouroboros system can allocate. Default: 10240. | <size_t> |
| SOCKET_TIMEOUT | The IRMd sends commands to IPCPs over UNIX sockets. This sets the timeout for such commands in milliseconds. Some commands can be set independently. Default: 1000. | <time_t> |
| BOOTSTRAP_TIMEOUT | Timeout for the IRMd to wait for a response to a bootstrap command from an IPCP in milliseconds. Default: 5000. | <time_t> |
| ENROLL_TIMEOUT | Timeout for the IRMd to wait for a response to an enroll command from an IPCP in milliseconds. Default: 60000. | <time_t> |
| CONNECT_TIMEOUT | Timeout for the IRMd to wait for a response to a connect command from an IPCP in milliseconds. Default: 5000. | <time_t> |
| REG_TIMEOUT | Timeout for the IRMd to wait for a response to a register command from an IPCP in milliseconds. Default: 3000. | <time_t> |
| QUERY_TIMEOUT | Timeout for the IRMd to wait for a response to a query command from an IPCP in milliseconds. Default: 3000. | <time_t> |
| IRMD_MIN_THREADS | The minimum number of threads in the threadpool the IRMd keeps waiting for commands. Default: 8. | <size_t> |
| IRMD_ADD_THREADS | The number of threads the IRMd will create if the current available threadpool is lower than IRMD_MIN_THREADS. Default: 8. | <size_t> |
| IPCP options | ||
| DISABLE_RAPTOR | Disable support for the raptor NetFPGA implementation. | True, False |
| DISABLE_BPF | Disable support for the Berkeley Packet Filter device interface for the Ethernet LLC layer. If no suitable interface is found, the LLC layer will not be built. | True, False |
| DISABLE_NETMAP | Disable netmap support for the Ethernet LLC layer. If no suitable interface is found, the LLC layer will not be built. | True, False |
| DISABLE_RAW_SOCKETS | Disable raw sockets support for the Ethernet LLC layer. If no suitable interface is found,the LLC layer will not be built. | True, False |
| DISABLE_DDNS | Disable Dynamic Domain Name System support for the UDP layer. | True, False |
| IPCP_SCHED_THR_MUL | The number of scheduler threads an IPCP runs per QoS cube. Default is 2. | <size_t> |
| IPCP_QOS_CUBE_BE_PRIORITY | Priority for the best effort qos cube scheduler thread. This is mapped to a system value. Scheduler threads have at least half the system max priority value. | 0..99 |
| IPCP_QOS_CUBE_VIDEO_PRIORITY | Priority for the video qos cube scheduler thread. This is mapped to a system value. Scheduler threads have at least half the system max priority value. | 0..90..99 |
| IPCP_QOS_CUBE_VOICE_PRIORITY | Priority for the voice qos cube scheduler thread. This is mapped to a system value. Scheduler threads have at least half the system max priority value. | 0..99 |
| IPCP_FLOW_STATS | Enable statistics for the data transfer component. | True, False |
| PFT_SIZE | The forwarding table in the normal IPCP uses a hashtable. This sets the size of this hash table. Default: 4096. | <size_t> |
| IPCP_MIN_THREADS | The minimum number of threads in the threadpool the IPCP keeps waiting for commands. Default: 4. | <size_t> |
| IPCP_ADD_THREADS | The number of threads the IPCP will create if the current available threadpool is lower than IPCP_MIN_THREADS. Default:4. | <size_t> |