#
# Project automation script for raptor
#
# Created for ISE version 14.7
#
# This file contains several Tcl procedures (procs) that you can use to automate
# your project by running from xtclsh or the Project Navigator Tcl console.
# If you load this file (using the Tcl command: source raptor.tcl), then you can
# run any of the procs included here.
#
# This script is generated assuming your project has HDL sources.
# Several of the defined procs won't apply to an EDIF or NGC based project.
# If that is the case, simply remove them from this script.
#
# You may also edit any of these procs to customize them. See comments in each
# proc for more instructions.
#
# This file contains the following procedures:
#
# Top Level procs (meant to be called directly by the user):
#    run_process: you can use this top-level procedure to run any processes
#        that you choose to by adding and removing comments, or by
#        adding new entries.
#    rebuild_project: you can alternatively use this top-level procedure
#        to recreate your entire project, and the run selected processes.
#
# Lower Level (helper) procs (called under in various cases by the top level procs):
#    show_help: print some basic information describing how this script works
#    add_source_files: adds the listed source files to your project.
#    set_project_props: sets the project properties that were in effect when this
#        script was generated.
#    create_libraries: creates and adds file to VHDL libraries that were defined when
#        this script was generated.
#    set_process_props: set the process properties as they were set for your project
#        when this script was generated.
#

set myProject "raptor"
set myScript "raptor.tcl"

#
# Main (top-level) routines
#
# run_process
# This procedure is used to run processes on an existing project. You may comment or
# uncomment lines to control which processes are run. This routine is set up to run
# the Implement Design and Generate Programming File processes by default. This proc
# also sets process properties as specified in the "set_process_props" proc. Only
# those properties which have values different from their current settings in the project
# file will be modified in the project.
#
proc run_process {} {

   global myScript
   global myProject

   ## put out a 'heartbeat' - so we know something's happening.
   puts "\n$myScript: running ($myProject)...\n"

   if { ! [ open_project ] } {
      return false
   }

   set_process_props
   #
   # Remove the comment characters (#'s) to enable the following commands
   # process run "Synthesize"
   # process run "Translate"
   # process run "Map"
   # process run "Place & Route"
   #
   set task "Implement Design"
   if { ! [run_task $task] } {
      puts "$myScript: $task run failed, check run output for details."
      project close
      return
   }

   set task "Generate Programming File"
   if { ! [run_task $task] } {
      puts "$myScript: $task run failed, check run output for details."
      project close
      return
   }

   puts "Run completed (successfully)."
   project close

}

#
# rebuild_project
#
# This procedure renames the project file (if it exists) and recreates the project.
# It then sets project properties and adds project sources as specified by the
# set_project_props and add_source_files support procs. It recreates VHDL Libraries
# as they existed at the time this script was generated.
#
# It then calls run_process to set process properties and run selected processes.
#
proc rebuild_project {} {

   global myScript
   global myProject

   project close
   ## put out a 'heartbeat' - so we know something's happening.
   puts "\n$myScript: Rebuilding ($myProject)...\n"

   set proj_exts [ list ise xise gise ]
   foreach ext $proj_exts {
      set proj_name "${myProject}.$ext"
      if { [ file exists $proj_name ] } {
         file delete $proj_name
      }
   }

   project new $myProject
   set_project_props
   add_source_files
   create_libraries
   puts "$myScript: project rebuild completed."

   run_process

}

#
# Support Routines
#

#
proc run_task { task } {

   # helper proc for run_process

   puts "Running '$task'"
   set result [ process run "$task" ]
   #
   # check process status (and result)
   set status [ process get $task status ]
   if { ( ( $status != "up_to_date" ) && \
            ( $status != "warnings" ) ) || \
         ! $result } {
      return false
   }
   return true
}

#
# show_help: print information to help users understand the options available when
#            running this script.
#
proc show_help {} {

   global myScript

   puts ""
   puts "usage: xtclsh $myScript <options>"
   puts "       or you can run xtclsh and then enter 'source $myScript'."
   puts ""
   puts "options:"
   puts "   run_process       - set properties and run processes."
   puts "   rebuild_project   - rebuild the project from scratch and run processes."
   puts "   set_project_props - set project properties (device, speed, etc.)"
   puts "   add_source_files  - add source files"
   puts "   create_libraries  - create vhdl libraries"
   puts "   set_process_props - set process property values"
   puts "   show_help         - print this message"
   puts ""
}

proc open_project {} {

   global myScript
   global myProject

   if { ! [ file exists ${myProject}.xise ] } {
      ## project file isn't there, rebuild it.
      puts "Project $myProject not found. Use project_rebuild to recreate it."
      return false
   }

   project open $myProject

   return true

}
#
# set_project_props
#
# This procedure sets the project properties as they were set in the project
# at the time this script was generated.
#
proc set_project_props {} {

   global myScript

   if { ! [ open_project ] } {
      return false
   }

   puts "$myScript: Setting project properties..."

   project set family "Virtex5"
   project set device "xc5vtx240t"
   project set package "ff1759"
   project set speed "-2"
   project set top_level_module_type "HDL"
   project set synthesis_tool "XST (VHDL/Verilog)"
   project set simulator "ISim (VHDL/Verilog)"
   project set "Preferred Language" "VHDL"
   project set "Enable Message Filtering" "false"

}


#
# add_source_files
#
# This procedure add the source files that were known to the project at the
# time this script was generated.
#
proc add_source_files {} {

   global myScript

   if { ! [ open_project ] } {
      return false
   }

   puts "$myScript: Adding sources to project..."

   xfile add "constraints.ucf"
   xfile add "coregen/block_ram.ngc"
   xfile add "coregen/block_ram.vhd"
   xfile add "coregen/cmd_fifo.ngc"
   xfile add "coregen/data_fifo.ngc"
   xfile add "coregen/pcie_core/source/bram_common.v"
   xfile add "coregen/pcie_core/source/cmm_decoder.v"
   xfile add "coregen/pcie_core/source/cmm_errman_cnt_en.v"
   xfile add "coregen/pcie_core/source/cmm_errman_cor.v"
   xfile add "coregen/pcie_core/source/cmm_errman_cpl.v"
   xfile add "coregen/pcie_core/source/cmm_errman_ftl.v"
   xfile add "coregen/pcie_core/source/cmm_errman_ram4x26.v"
   xfile add "coregen/pcie_core/source/cmm_errman_ram8x26.v"
   xfile add "coregen/pcie_core/source/cmm_intr.v"
   xfile add "coregen/pcie_core/source/extend_clk.v"
   xfile add "coregen/pcie_core/source/pcie_blk_cf.v"
   xfile add "coregen/pcie_core/source/pcie_blk_cf_arb.v"
   xfile add "coregen/pcie_core/source/pcie_blk_cf_err.v"
   xfile add "coregen/pcie_core/source/pcie_blk_cf_mgmt.v"
   xfile add "coregen/pcie_core/source/pcie_blk_cf_pwr.v"
   xfile add "coregen/pcie_core/source/pcie_blk_if.v"
   xfile add "coregen/pcie_core/source/pcie_blk_ll.v"
   xfile add "coregen/pcie_core/source/pcie_blk_ll_arb.v"
   xfile add "coregen/pcie_core/source/pcie_blk_ll_credit.v"
   xfile add "coregen/pcie_core/source/pcie_blk_ll_oqbqfifo.v"
   xfile add "coregen/pcie_core/source/pcie_blk_ll_tx.v"
   xfile add "coregen/pcie_core/source/pcie_blk_ll_tx_arb.v"
   xfile add "coregen/pcie_core/source/pcie_blk_plus_ll_rx.v"
   xfile add "coregen/pcie_core/source/pcie_blk_plus_ll_tx.v"
   xfile add "coregen/pcie_core/source/pcie_clocking.v"
   xfile add "coregen/pcie_core/source/pcie_core.v"
   xfile add "coregen/pcie_core/source/pcie_ep.v"
   xfile add "coregen/pcie_core/source/pcie_gt_wrapper.v"
   xfile add "coregen/pcie_core/source/pcie_gt_wrapper_top.v"
   xfile add "coregen/pcie_core/source/pcie_gtx_wrapper.v"
   xfile add "coregen/pcie_core/source/pcie_mim_wrapper.v"
   xfile add "coregen/pcie_core/source/pcie_reset_logic.v"
   xfile add "coregen/pcie_core/source/pcie_soft_int.v"
   xfile add "coregen/pcie_core/source/pcie_top.v"
   xfile add "coregen/pcie_core/source/prod_fixes.v"
   xfile add "coregen/pcie_core/source/sync_fifo.v"
   xfile add "coregen/pcie_core/source/tlm_rx_data_snk.v"
   xfile add "coregen/pcie_core/source/tlm_rx_data_snk_bar.v"
   xfile add "coregen/pcie_core/source/tlm_rx_data_snk_mal.v"
   xfile add "coregen/pcie_core/source/tlm_rx_data_snk_pwr_mgmt.v"
   xfile add "coregen/pcie_core/source/tx_sync_gtp.v"
   xfile add "coregen/pcie_core/source/tx_sync_gtx.v"
   xfile add "coregen/ram_4kB.ngc"
   xfile add "coregen/ram_4kB.vhd"
   xfile add "coregen/simple_fifo.ngc"
   xfile add "hdl/buff.vhd"
   xfile add "hdl/dma.vhd"
   xfile add "hdl/engine.vhd"
   xfile add "hdl/eth.vhd"
   xfile add "hdl/eth_rx.vhd"
   xfile add "hdl/eth_tx.vhd"
   xfile add "hdl/mdio.vhd"
   xfile add "hdl/pcie.vhd"
   xfile add "hdl/pcie_rx.vhd"
   xfile add "hdl/pcie_tx.vhd"
   xfile add "hdl/pcie_wrapper.vhd"
   xfile add "hdl/port_fifo.vhd"
   xfile add "hdl/recv_mux.vhd"
   xfile add "hdl/rx_eth.vhd"
   xfile add "hdl/send_mux.vhd"
   xfile add "hdl/system_loop.vhd"
   xfile add "hdl/top.vhd"
   xfile add "hdl/tx_eth.vhd"
   xfile add "hdl/xaui/xaui_top.vhd"
   xfile add "hdl/xaui/xaui_v10_4.ngc"
   xfile add "hdl/xaui/xaui_v10_4_block.vhd"
   xfile add "hdl/xaui/xaui_v10_4_cc_2b_1skp.vhd"
   xfile add "hdl/xaui/xaui_v10_4_chanbond_monitor.vhd"
   xfile add "hdl/xaui/xaui_v10_4_rocketio_wrapper.vhd"
   xfile add "hdl/xaui/xaui_v10_4_rocketio_wrapper_tile.vhd"
   xfile add "hdl/xaui/xaui_v10_4_tx_sync.vhd"
   xfile add "tests/buff_test.vhd"
   xfile add "tests/engine_test.vhd"
   xfile add "tests/eth_buff_loop_test.vhd"
   xfile add "tests/eth_rx_test.vhd"
   xfile add "tests/eth_tx_test.vhd"
   xfile add "tests/pcie_rx_test.vhd"
   xfile add "tests/pcie_tx_test.vhd"
   xfile add "tests/queue_test.vhd"
   xfile add "tests/send_mux_test.vhd"
   xfile add "tests/system_loop_test.vhd"

   # Set the Top Module as well...
   project set top "arch" "top"

   puts "$myScript: project sources reloaded."

} ; # end add_source_files

#
# create_libraries
#
# This procedure defines VHDL libraries and associates files with those libraries.
# It is expected to be used when recreating the project. Any libraries defined
# when this script was generated are recreated by this procedure.
#
proc create_libraries {} {

   global myScript

   if { ! [ open_project ] } {
      return false
   }

   puts "$myScript: Creating libraries..."


   # must close the project or library definitions aren't saved.
   project save

} ; # end create_libraries

#
# set_process_props
#
# This procedure sets properties as requested during script generation (either
# all of the properties, or only those modified from their defaults).
#
proc set_process_props {} {

   global myScript

   if { ! [ open_project ] } {
      return false
   }

   puts "$myScript: setting process properties..."

   project set "Reduce Control Sets" "Auto" -process "Synthesize - XST"
   project set "Target UCF File Name" "/users/gsharma/raptor/netfpga10g/constraints.ucf" -process "Back-annotate Pin Locations"
   project set "Enable Internal Done Pipe" "true" -process "Generate Programming File"
   project set "LUT Combining" "Auto" -process "Synthesize - XST"

   puts "$myScript: project property values set."

} ; # end set_process_props

proc main {} {

   if { [llength $::argv] == 0 } {
      show_help
      return truever
   }

   foreach option $::argv {
      switch $option {
         "show_help"           { show_help }
         "run_process"         { run_process }
         "rebuild_project"     { rebuild_project }
         "set_project_props"   { set_project_props }
         "add_source_files"    { add_source_files }
         "create_libraries"    { create_libraries }
         "set_process_props"   { set_process_props }
         default               { puts "unrecognized option: $option"; show_help }
      }
   }
}

if { $tcl_interactive } {
   show_help
} else {
   if {[catch {main} result]} {
      puts "$myScript failed: $result."
   }
}