| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The application was generating its public keypair for its ECDHE key
exchange. This is now done by the IRMd, which will check the requested
qosspec and then apply what is needed. The flow_alloc and flow_accept
calls will just return the symmetric key to the application.
This makes it easier when we add configurations with given public key
pairs and other encryption algorithms, which can then all be
configured globally in the IRMd instead of having all the options
replicated and implemented in each and every application.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
The stderr lines had no newline. Fixed.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
| |
The timeout comparison for keepalives could overflow on 32-bit
systems, as times were converted to nanoseconds and be limited to a
bit over 4 seconds. This caused flow reads to fail miserably with
EFLOWPEER errors when keepalives were set higher on these systems.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
| |
The pid of the N-1 IPCP process was needlessly stored in the flow
struct. We only need it to open the right shared memory maps, which is
done when the flow is created.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
| |
The cryptography functions were in a C source that was directly
imported into dev.c, enabling ECDHE+AES256 symmetric key encryption on
flows. Now crypt.c is an independent source file with associated
crypt.h header, to prepare for security management and configuration
in the IRMd.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The application had a port construct, which is a leftover from the
early days implementing RINA specs, which had a "port_id" to access
flows. O7s doesn't really have a "port" concept, only flows. The
port_wait_assign function was used in the IPCP to wait for the IRMd to
assign the flow_id and return so the flow object could be created.
This renames things a bit, and also simplifies the locking to us a
single lock/condvar for managing flows. This should be further
improved to move the flow state into the flow object, maintain a
double mapping of to flow objects (id_to_flow and fd_to_flow) and
malloc flow objects at flow allocation, instead of keeping the full
table in memory at init to further reduce memory footprint.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
The init will now print more useful errors if a process fails to
initialize. Also rearranged these procedures a little bit.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
Doesn't make any sense to call it a port event...
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
Compilation on raspberry pi revealed some previously undetected
signed/unsigned comparisons in the library.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
That while loop is not needed anymore.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
Better to keep these separate during IRMd revision. Moves the qosspec
default out of the protobuf message parsing.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds initial support for configuration files using the C99 TOML
parser (to be installed separately from https://github.com/cktan/tomlc99).
The default location for the IRMd configuration file is
/etc/ouroboros/irmd.conf. This is configurable at build time.
An example file will be installed in the configuration directory with
the name irmd.conf.example.
Config file support can be disabled using the DISABLE_CONFIGFILE build
option.
There were some refactors and changes to the configuration messages
and protobuf files. This works towards consolidation of protobuf C as
an option for more generic handling of serialization/deserialization
of various messages.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
The internal hash enum now matches the public one w.r.t. directory
hash policies. This removes some unnecessary conversion.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
2022 was a rather slow year...
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
Found by Clang version 15.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
| |
The dealloc call will now always do a non-blocking read before
attempting to destroy the rbuff, ensuring all keepalives are
processed.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
There was an unused struct timerwheel * lingering in the application
instance.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
Growing pains.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
| |
If a flow was deallocated while there were still unprocessed events in
an fqueue, it would cause a SEGV in fqueue_next because it was not
checking the validity of the returned flow descriptor.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
The fqueues were relying on the fact that the portevent were two
integers. This cleans that up a bit.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
The protobuf message was free'd before usage in flow_init.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The application will now handle incoming FRCT packets even if the
application never reads data from the flow (for instance servers). To
do this, it reserves an fset_t (id 0). When an FRCT-enabled flow is
created, it is automatically added to this fset. An rx thread will
listen for incoming events and perform necessary actions on the flow
if needed. If the FRCT flow is added to another user fset, it will be
handled by that user fset (and if the flow is removed from a user
fset, it will be re-added to the set with id 0 to be handled by the
rx_flow thread. The flow monitoring is handled by the same thread,
replacing the previous monitoring thread.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
| |
Now the instance keeps all flows for an application in a linked list
to easily iterate over all allocated flows, which is needed by the
keepalive monitoring. This is more efficient that tracking min and max
fd.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
We don't need to iterate fsets anymore since the removal of fset_keepalive.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The frcti_filter was reading raw data from the buffers, causing the
frcti_rcv to operate directly on encrypted packets. It decrypt and
filter for invalid packets. I moved the function from frct to the
fqueue implementation and renamed it fqueue_filter as it filters
fqueues. Should be extended to filter out keepalives on non-FRCT
flows, as these will now still cause spurious wakeups.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
| |
This adds a monitoring thread to handle flow keepalive management in
the application and removes the thread interruptions to schedule FRCT
calls within the regular IPC calls.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reading/writing to (N + 1)-flows from the IPCP was using a raw QoS flow
to bypass some functions in the ipcp_flow_read call. But this call was
broken for keepalive packets. Fixing the ipcp_flow_read call for
(N - 1) flows causes the IPCPs to drop 0-byte keepalive packets coming from
(N + 1) client flows.
>From now on, there is a dedicated call for (N + 1) reads/writes from
the IPCPs that's more efficient and cleaner. The (N + 1) flow internal
QoS is now also defaulted to a qos_np1 qosspec, instead of tampering
with the qosspec requested by the (N + 1) client.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the first step moving away from scheduling the FRCT and flow
monitoring functions as part of the IPC calls (flow_read / flow_write
/ fevent) and towards the more scalable (and far less complicated)
implementation to take care of these functions in separate threads.
If a process creates the first flow that requires FRCT, it will spin
up a thread to process events on the timerwheel (retransmissions and
delayed ACKs). This single thread lives until the last flow with FRCT
is deallocated.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
The creation of FRCT instances (if needed) is now part of flow_init()
call instead of an addition after the flow is initialized.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
Writing valid packets to the rbuff (add crc check, encrypt) is now
extracted into a function.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
Prog name is not used anymore, probably a remnant from the early days,
when we were passing rina_name_t tuples all over the place.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reading packets from the rbuff and checking their validity (non-zero
size, pass crc check, pass decryption) is now extracted into a
function.
Also adds a function to get the length of an sdu_du_buff instead of
subtracting the tail and head pointers.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
The fset add function was notifying for each packet already stored in
the rx rbuff, which isn't needed.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The maximum packet lifetime (MPL) is a property of the flow that needs
to be passed to the reliable transmission protocol (FRCP) for its
correct operation. Previously, the value of MPL was set fixed as one
of the (fixed) Delta-t parameters. This patch makes the MPL a property
of the layer, and it can now be set per layer-type at build time.
This is a step towards a proper MPL estimator in the flow allocator.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
| |
The parameters were set directly from the build configs. A first step
to making FRCP configurable at runtime, is to pass the parameters to
the frcti_create() function.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
If the keepalive would underflow if set to 1-3 ms.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
The rib_init return value wasn't checked.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
Bare FRCP messages (ACKs without data, Rendez-vous packets) were not
encrypted on encrypted flows, causing the receiver to fail decryption.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
| |
The qosspec_t now has a timeout value that sets the timeout value of
the flow. Flows with a peer that has timed out will now return
-EFLOWPEER on flow_read() or flow_write().
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds flow liveness monitoring for flows, with a fixed timeout of
120s. I will make it configurable at flow allocation later on (timeout
needs to be communicated to the peer). If one peer dies, or doesn't
call any IPC calls (flow_write/flow_read/fevent) it will stop sending
keepalives and the other peer's read/writes will error on an
-EFLOWDOWN after the timeout expires.
Packets without a payload (0 length packets) are interpreted as
keepalive packets for the flow. They can be sent from any application,
but they will not trigger a message read at the receiver side (0 as a
return value on flow_read indicates a previous partial read has
completed at exactly the buffer size).
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
| |
The flow_set will now keep a list of the flows in the set, this makes
it more efficient to iterate over the flows. Extending the public API
for fset_t with an iterator will also be useful.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The fccntl call FRCTSFLAGS was using a pointer to a flags so set
flags, which should just be a regular uint16_t.
For instance, the FRCTLINGER flags can now be turned off using
fccntl(fd, FRCTSFLAGS, FRCTFRESCNTL | FRCTFRTX)
leaving only resource control (flow control, FRCTFRESCNTL) and
retransmission enabled. Note that retransmission (FRCTFRTX) can't be
enabled or disabled on a live flow, it will be set on flow allocation.
Updates the man page for fccntl to add these FRCT options.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
| |
This is a fix to wait for outstanding retransmissions when a flow is
deallocated. Instead of waiting the full timeout, it will now wait in
the same tic increments used within FRCT. Bit of a stopgap at the
moment, FRCT and the flows are in need of a serious refactor.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
There was some leftover code in dev.c wrt to the process RIB that is
not needed anymore.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This will skip rib_init() at __init() for IPCPs (or at least,
processes that have "ipcpd" in the executable name). The previous code
tried to unmount the generic mount and then remount under the ipcp
name, but it often failed because fuse_mount() is asynchronous and the
mount was not up at the time of the unmount() call. Renaming the mount
instead of unmounting failed for the same reason. This is a better
fix for now.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
| |
Application flows can now be monitored from the RIB, exposing FRCT
statistics (window edges, retransmission timeout, rtt estimate, etc).
Application RIB requires user permissions to be able to access
/dev/fuse.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This add an ouroboros/pthread.h header that wraps the
pthread_..._unlock() functions for cleanup using
pthread_cleanup_push() as this casting is not safe (and there were
definitely bad casts in the code). The close() function is now also
wrapped for cleanup in ouroboros/sockets.h.
This allows enabling more compiler checks.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
The ugent email addresses are shut down, updated to Ouroboros mail
addresses.
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
| |
Happy New Year, Ouroboros!
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|
|
|
|
|
|
|
|
| |
DH key creation was returning -ECRYPT if opennssl is not installed,
instead of success (0).
Signed-off-by: Dimitri Staessens <dimitri@ouroboros.rocks>
Signed-off-by: Sander Vrijders <sander@ouroboros.rocks>
|