lib: Update FRCP implementation

2026-05-20T06:17:07+00:00

The Flow and Retransmission Control Protocol (FRCP) runs end-to-end between two peers over a flow. It provides reliability, in-order delivery, flow control, and liveness. Note that congestion avoidance is orthogonal to FRCP and handled in the IPCP. A fixed 16-octet header, network byte order, is prefixed to every FRCP packet: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | flags | hcs | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | window | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | seqno | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ackno | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | payload (variable) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ hcs is a CRC-16-CCITT-FALSE checksum over the PCI (and the stream extension when present), verified before any flag-driven dispatch. A single packet can simultaneously carry DATA + ACK + FC + RXM by OR-ing flag bits. An optional CRC trailer covers the body on DATA when qs.ber == 0, and on every SACK packet; an optional AEAD wrap (per-flow keys) sits outermost. Flag bits (MSB-first; bits 13..15 reserved, MUST be zero): +------+--------+--------+----------------------------------------+ | Bit | Mask | Name | Meaning | +------+--------+--------+----------------------------------------+ | 0 | 0x8000 | DATA | Carries caller payload | | 1 | 0x4000 | DRF | Start of a fresh data run | | 2 | 0x2000 | ACK | ackno field valid | | 3 | 0x1000 | NACK | Pre-DRF nudge (seqno informational) | | 4 | 0x0800 | FC | window field valid (rwe advertisement) | | 5 | 0x0400 | RDVS | Rendezvous probe (window-closed) | | 6 | 0x0200 | FFGM | First Fragment of a multi-fragment SDU | | 7 | 0x0100 | LFGM | Last Fragment of a multi-fragment SDU | | 8 | 0x0080 | RXM | Retransmission | | 9 | 0x0040 | SACK | Block list follows in payload | | 10 | 0x0020 | RTTP | RTT probe / echo (payload follows) | | 11 | 0x0010 | KA | Keepalive | | 12 | 0x0008 | FIN | End of stream marker | | 13-15| -- | -- | Reserved (MUST be zero) | +------+--------+--------+----------------------------------------+ (FFGM, LFGM) encodes the fragment role of a DATA packet (SCTP-style B/E): 11=SOLE, 10=FIRST, 00=MID, 01=LAST. Each fragment carries its own seqno; Retransmission recovers fragments individually, reassembly runs at consume time. In stream mode FFGM/LFGM are unused; per-byte position is carried by the stream extension below and end-of-stream is signalled by FIN on a 0-byte DATA packet. SACK payload (FRCT_ACK | FRCT_FC | FRCT_SACK): 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | n_blocks | padding (2 octets) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | start[0] | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | end[0] | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ... n_blocks pairs total ... Each block describes a *present* (received) range strictly above the cumulative ACK in the PCI ackno. D-SACK (RFC 2883) is signalled in-band as block[0] - no flag bit, no extra framing - and consumed by the RACK reo_wnd_mult scaler (RFC 8985 sec. 7.2). RTTP payload (FRCT_RTTP only; 24 octets): 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | probe_id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | echo_id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | + nonce (16 octets, echoed verbatim) + | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Stream PCI extension (in_order == STREAM only; 8 octets after the base PCI on every DATA packet): 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | start | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | end | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ start, end are monotonic 32-bit byte offsets; end - start equals the on-wire payload length. Stream mode is negotiated at flow allocation; the extension is present iff stream mode is in use, never on a per-packet basis. Service modes are an orthogonal (in_order, loss, ber) vector selected at flow_alloc; the cubes above map to the axes: +----------------+---------+------+-----+-----------------------+ | Cube | in_order| loss | ber | Engaged | +----------------+---------+------+-----+-----------------------+ | qos_raw | 0 | 1 | 1 | Raw passthrough | | qos_raw_safe | 0 | 1 | 0 | Raw + CRC trailer | | qos_rt | 1 | 1 | 1 | FRCP, no FRTX, no CRC | | qos_rt_safe | 1 | 1 | 0 | FRCP, no FRTX, CRC | | qos_msg | 1 | 0 | 0 | FRCP + FRTX | | qos_stream | 2 | 0 | 0 | FRCP + FRTX, stream | +----------------+---------+------+-----+-----------------------+ in_order=0 sends raw datagrams with no PCI (UDP-equivalent); in_order=1 engages FRCP with SDU framing; in_order=2 (stream) requires loss=0 and is rejected otherwise. loss=0 engages the FRTX retransmit machinery. ber=0 appends the CRC-32 trailer; QOS_DISABLE_CRC at build time forces ber=1 for development. Encryption is a separate per-flow attribute layered as an AEAD wrap outside the FRCP packet. Heritage: delta-t (Watson 1981) supplies timer-based connection management - no SYN/FIN handshake, the DRF marker, the t_mpl / t_a / t_r timers. RINA (Day 2008) supplies the unified flow_alloc(name, qos, ...) primitive and the orthogonal QoS-cube axes. Loss detection follows TCP/QUIC practice (RFCs 2018, 2883, 6582, 6298, 8985); RTT probing is nonce-authenticated like QUIC PATH_CHALLENGE. Adds oftp, a minimal file-transfer tool over an FRCP stream flow. The client reads from stdin or --in FILE and writes through a flow_alloc(qos_stream); the server (--listen) calls flow_accept and writes to stdout or --out FILE. Both sides compute a CRC-64/NVMe over the bytes they handle and print the result. The server rejects flows whose negotiated qs.in_order != STREAM. Two FRCP knobs are exposed via env vars on either side: OFTP_FRCT_RTO_MIN fccntl FRCTSRTOMIN (ns) OFTP_FRCT_STREAM_RING_SZ fccntl FRCTSRRINGSZ (octets) The ocbr_client gains an OCBR_QOS env var to pick the cube the client uses for flow_alloc; recognised values are raw, safe, rt, rt_safe, msg, stream. Unknown values fall back to raw with a warning on stderr. Without the env set behaviour is unchanged. Removes the deprecated lib/timerwheel.c Signed-off-by: Dimitri Staessens Signed-off-by: Sander Vrijders

build: Refactor CMake back to in-tree CMakeLists

2026-02-13T08:22:29+00:00

This moves the build definitions back to src/ subdirectories (CMakeLists.txt per component). Configuration and dependencies are kept out of tree. Configuration options are bundled into cmake/config/ modules. Dependencies are grouped by component (system/, crypt/, eth/, coverage/, etc.). It now consistently uses target-based commands (target_include_directories, target_link_libraries) instead of global include_directories(). Proper PRIVATE/PUBLIC visibility for executable link libraries. CONFIG_OUROBOROS_DEBUG now properly set based on being a valid debug config (not just checking the string name). It also adds OuroborosTargets export for find_package() support and CMake package config files (OuroborosConfig.cmake) for easier integration with CMake projects. The build logic now follows more idiomatic CMake practices with configuration separated from target definitions. Signed-off-by: Dimitri Staessens Signed-off-by: Sander Vrijders

build: Refactor CMake modules

2026-01-07T09:00:06+00:00

This moves the CMake build logic out of the source tree and splits it up into a more modular form. The tests now have a CMakeLists.txt file in their respective source directory. Signed-off-by: Dimitri Staessens Signed-off-by: Sander Vrijders

ipcpd: Add broadcast IPCP

2018-10-24T09:58:49+00:00

This adds a broadcast IPCP that allows us to easily create multicast applications. The broadcast IPCP accepts flows for ".mc". A tool, obc (Ouroboros broadcast), is added that sends and reads a message to a broadcast layer. Signed-off-by: Dimitri Staessens Signed-off-by: Sander Vrijders

tools: Add ovpn application

2018-10-22T14:38:44+00:00

This adds the ovpn application which allows to send TCP/IP traffic over Ouroboros. This is done by opening a TUN interface and allocating a flow to another ovpn application so that applications using TCP/IP can be used over Ouroboros as well. Signed-off-by: Sander Vrijders Signed-off-by: Dimitri Staessens

build: Allow out-of-tree build of tools

2018-02-14T16:58:51+00:00

This removes the dependencies for the tools on some ouroboros internal headers (endian.h and time_utils.h) so they can be built out-of-tree. The echo-app tool has been renamed oecho and the cbr tool has been renamed ocbr. Signed-off-by: Dimitri Staessens Signed-off-by: Sander Vrijders

tools: Add operf tool

2016-10-30T12:24:19+00:00

This tool allows bidirectional bandwidth measurement between a client and server application. The server reflects all traffic back to the client. The traffic can be capped at a certain rate or set to flood.

tools: Add a ping application

2016-08-03T11:10:54+00:00

Ouoroboros ping application mimics the GNU ping application. do "oping --help" for options.

tools, lib: cbr tool for bandwidth testing

2016-05-24T18:45:30+00:00

The tool sends constant bandwidth traffic between a client and a server. cbr --help for more info. Adds time_utils.h to the library containing useful functions for arithmetic with timespec and timeval structures.

tools: Simple echo application

2016-03-21T16:41:29+00:00

This adds a simple echo application written to show application how to use the API. It also updates the dev.h header file with the insights gained from performing this excercise.

ouroboros/src/tools/CMakeLists.txt, branch 0.24.0